Clicky

Lumonic•Photo

Lumonic•Photo Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Lumonic•Photo, Porcupine, ON.

We control panel for the vacuum system. This allows remote control of a lot of the functions of the coating process from...
04/05/2022

We control panel for the vacuum system. This allows remote control of a lot of the functions of the coating process from the deposition controller.
.
#vacuum #uhv #thermalevaporation

Ion gun and new infrared lamps installed.  Need to route the gas line and  mass flow controllers. .#iongun #vacuum #vacu...
04/01/2022

Ion gun and new infrared lamps installed. Need to route the gas line and mass flow controllers.
.
#iongun #vacuum #vacuumsystem #uhv #pvd #pvdcoating

RGA finally running. It wound to talk to the laptop so i replaced the interface module. They it gave me nonsense reading...
03/24/2022

RGA finally running. It wound to talk to the laptop so i replaced the interface module. They it gave me nonsense readings. Something wrong with he rf section. Luckily I had another to steal parts from.

Trying to get one of my coating systems up and running again. It’s been sitting for years since I put the turbo pump on ...
03/22/2022

Trying to get one of my coating systems up and running again. It’s been sitting for years since I put the turbo pump on it. I have a small leak someplace and no amount of IPA or argon is finding it. Luckily I have a baseplate adapter and can connect my RGA.
.
#vacuum #vacuumsystem #iongauge #pvd #highvacuum

Ok. Time to try and figure out how to use these fancy Monarch 10ee metric change gears that I got from @americanmachinea...
03/19/2022

Ok. Time to try and figure out how to use these fancy Monarch 10ee metric change gears that I got from @americanmachineandgear 3 years ago. I have to make some weird M11x1.75 threads.

#lathe #monarch10ee #machining

Finished other than cutting the chain to length and adding a snap for the collar. Based on art from @stephaniepriscilla ...
02/17/2022

Finished other than cutting the chain to length and adding a snap for the collar. Based on art from @stephaniepriscilla
.
#cosplay #latexcosplay #collar #necklace #croptop #cutebutpsycho #chain #latexfashion #radicalrubber @radicalrubber #sailormoon #sailormars #reihino #hinorei #gothgirl

Finished appliqué ..#laser #lasercutting #latex #latexcosplay #sailormoon #sailormars
02/17/2022

Finished appliqué
.
.
#laser #lasercutting #latex #latexcosplay #sailormoon #sailormars

02/17/2022

Cutting appliqué for the next project.
.
.
#stephaniepriscilla #latex #lasercutter #cnc #cosplay #anime #sailormoon

02/15/2022

Letbold 150CSV, made up a cable for the NT-20 turbo drive and looks like it works.
.
.
#turbopump #leybold #vacuum #uhv

Wiring for the big laser cutter / router is almost done. Just a few more and we should be able to make the machine move....
02/13/2022

Wiring for the big laser cutter / router is almost done. Just a few more and we should be able to make the machine move. Yaskawa Sigma 5 servos.
.
#yaskawa #sigma #servo #cnc #cncrouter #lasercutter

Working on a latex halter top designed based on art from @stephaniepriscilla. Doing the toolpaths for the laser i Master...
02/10/2022

Working on a latex halter top designed based on art from @stephaniepriscilla. Doing the toolpaths for the laser i Mastercam.
.
.
#reihino #hinorei #sailormoon #latex #sailormars #cosplay #latexcosplay #mastercam #haltertop

Neat Soviet era rocket lamp I picked up from Ukraine. Had to have one after I saw it on @curiousmarc YouTube channel. Co...
02/06/2022

Neat Soviet era rocket lamp I picked up from Ukraine. Had to have one after I saw it on @curiousmarc YouTube channel. Converted it to led and uses less than 1w now.
.
#rocket #lamp #rocketlamp #spacerace #spaceage

Latex chainsawman nurse cosplays with @xiphosprince and @mybunnywaifu dresses from @shhhcouturelatex hat thing by me. .#...
02/05/2022

Latex chainsawman nurse cosplays with @xiphosprince and @mybunnywaifu dresses from @shhhcouturelatex hat thing by me.
.
#latex #latexcosplay #chainsawman #cosplay

A few more. Latex Morrigan and Lilith. Outfits by me. Headwings modeled and printed by @xiphosprince who is Lilith. Morr...
01/13/2022

A few more. Latex Morrigan and Lilith. Outfits by me. Headwings modeled and printed by @xiphosprince who is Lilith. Morrigan is @jinxukitsu Big wings laser cut at @oshcut

#morrigan #lilith #cosplay #latexcosplay #darkstalkers #kumoricon #kumoricon2021 @vivishine.company @radicalrubber

The darkstalkers cosplays were the most popular thing I have ever posted. Huh. Hopefully @jinxukitsu and @xiphosprince  ...
12/31/2021

The darkstalkers cosplays were the most popular thing I have ever posted. Huh.

Hopefully @jinxukitsu and @xiphosprince and I will find a better location and shoot this again this year.

#morrigan #lilith #cosplay #latexcosplay #darkstalkers #kumoricon #kumoricon2021 @vivishine.company @radicalrubber

Hard to believe the was already a year ago. Sigh. The next shoot with @sydabee will be a bit corny. Dress from @shhhcout...
12/21/2021

Hard to believe the was already a year ago. Sigh. The next shoot with @sydabee will be a bit corny. Dress from @shhhcouturelatex
.
#latex #purple #seethrough #transparent #outdoor #latexfashion #fashion #mermaiddress

This is boring.This is the (key)way.#gears #boring #lathe #broach
12/21/2021

This is boring.

This is the (key)way.

#gears #boring #lathe #broach

Finished part. Idler pulley for the laser cutter X axis. ..#cnc #laser #lasercutter #cncmill
12/19/2021

Finished part. Idler pulley for the laser cutter X axis.
.
.
#cnc #laser #lasercutter #cncmill

12/19/2021

Movin some metal, 1/4” DOC. Could probably move faster but with micro drop coolant I’m not risking it.
.
.
#cnc #cncmill @yg1cuttingtools_official

That’s one shiny end mill from YG-1. Normally use lake shore carbide’s 3 flute variables. Figured give this a try. ..#cn...
12/18/2021

That’s one shiny end mill from YG-1. Normally use lake shore carbide’s 3 flute variables. Figured give this a try.
.
.
#cnc #cncmjll #endmill #aluminum @yg1cuttingtools_official

Had parts laser cut by @oshcut. Welded them up this weekend and powder coated them. ..#lasercutter #laser #powdercoating
12/06/2021

Had parts laser cut by @oshcut. Welded them up this weekend and powder coated them.
.
.
#lasercutter #laser #powdercoating

Had parts laser cut by @oshcut. Welded them up this weekend and powder coated them. ..#lasercutter #laser #powdercoating
12/06/2021

Had parts laser cut by @oshcut. Welded them up this weekend and powder coated them.
.
.
#lasercutter #laser #powdercoating

Couple more duo pics. Need to find somewhere in the PNW to shoot these for real. If anyone has any ideas I’m all ears. L...
11/25/2021

Couple more duo pics. Need to find somewhere in the PNW to shoot these for real. If anyone has any ideas I’m all ears.

Latex Morrigan and Lilith. Outfits by me. Headwings modeled and printed by @xiphosprince who is Lilith. Morrigan is @jinxukitsu Big wings laser cut at @oshcut

#morrigan #lilith #cosplay #latexcosplay #darkstalkers #kumoricon #kumoricon2021 @vivishine.company @radicalrubber

Finally some decent pics. Latex Morrigan and Lilith. Outfits by me. Headwings modeled and printed by @xiphosprince who i...
11/25/2021

Finally some decent pics. Latex Morrigan and Lilith. Outfits by me. Headwings modeled and printed by @xiphosprince who is Lilith. Morrigan is @jinxukitsu Big wings laser cut at @oshcut

#morrigan #lilith #cosplay #latexcosplay #darkstalkers #kumoricon #kumoricon2021 @vivishine.company @radicalrubber

Marking some repairs to the legs. The appliqués were coming loose at the edge. I should have applied them after they wer...
11/19/2021

Marking some repairs to the legs. The appliqués were coming loose at the edge. I should have applied them after they were put on the victims. That and thinner material for them. Oh well. Inflated them and then glued them back down.
.
.
#latex #cosplay #latexcosplay #morrigan #lilith #darkstalkers

Laser z axis installed on router. ..#laser #lasercutter #cnc #cnclaser #cncrouter
11/13/2021

Laser z axis installed on router.
.
.
#laser #lasercutter #cnc #cnclaser #cncrouter

Putting together an attachment for a friends cnc router so we can use the 225W rofin laser on it. Machined the parts las...
11/10/2021

Putting together an attachment for a friends cnc router so we can use the 225W rofin laser on it. Machined the parts last night and used some ceramic filled epoxy to bed the linear trucks in place.
.
.
#cnc #laser #lasercutter #smartmotor #linearbearing #cncrouter

Finally finished. Latex Morrigan and Lilith. Outfits by me. Headwings modeled and printed by @xiphosprince who is Lilith...
11/07/2021

Finally finished. Latex Morrigan and Lilith. Outfits by me. Headwings modeled and printed by @xiphosprince who is Lilith. Morrigan is @jinxukitsu Big wings laser cut at @oshcut

#morrigan #lilith #cosplay #latexcosplay #darkstalkers #kumoricon #kumoricon2021 @vivishine.company @radicalrubber

Headwings are basically done. @xiphosprince modeled, printed and started painting them, I finished the paint, laser cut ...
11/04/2021

Headwings are basically done. @xiphosprince modeled, printed and started painting them, I finished the paint, laser cut latex membranes and assembled. Just need stronger magnets now.
.
.
#latex #latexcosplay

Couldn’t find red boots that would arrive in time so we went shoe shopping and found some white ones at forever 21 and I...
11/01/2021

Couldn’t find red boots that would arrive in time so we went shoe shopping and found some white ones at forever 21 and I painted them.
.
.
#cosplay #boots #angeluspaint

One mememekini done with all the decorations. ..#latex #latexcosplay #mememe #teddyloid #cosplay #bikini @teddyloidspace
10/31/2021

One mememekini done with all the decorations.
.
.
#latex #latexcosplay #mememe #teddyloid #cosplay #bikini @teddyloidspace

You may not see the bikini at con but you will see this. Modified commercially available dress, gloves, and stockings. ....
10/28/2021

You may not see the bikini at con but you will see this. Modified commercially available dress, gloves, and stockings.
.
#latex #latexcosplay #mememe #teddyloid #cosplay #anime

One of the last things I am making for @kumoricon though few will see them. .#bikini #microkini #microbikini #mememe #te...
10/27/2021

One of the last things I am making for @kumoricon though few will see them.
.
#bikini #microkini #microbikini #mememe #teddyloid #latex #transparent #cosplay #latexcosplay

Almost done making stuff and preparing for kumoricon. So close…Garter belt to go with the skirt and top I made earlier a...
10/27/2021

Almost done making stuff and preparing for kumoricon. So close…
Garter belt to go with the skirt and top I made earlier and a collar for that too. And some fingerless gloves. Ordered more garter clips and the found I had some when I went looking for my rivets. Sigh.
.
#collar #latex #latexcollar #latexcosplay #cosplay #gloves #transparent #garterbelt

Latex miniskirt and b***d top. ..#latex #cosplay #red #miniskirt #boning
10/26/2021

Latex miniskirt and b***d top.
.
.
#latex #cosplay #red #miniskirt #boning

Address


Telephone

+15038695063

Website

[email protected]/" rel="nofollow,noopener" target="_blank">https://www.flickr.com/photos/[email protected]/

Alerts

Be the first to know and let us send you an email when Lumonic•Photo posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Lumonic•Photo:

Videos