29/08/2026
β οΈ SAFETY ALERT: CHECK BEFORE YOU OPEN β οΈ
π NEVER LET ROUTINE WORK CREATE ROUTINE RISK!
The uploaded incident is a powerful reminder that before performing ANY job in an industry, we must STOP, CHECK, and then ACT.
During cleaning activity, the main opening/hole of a tank was opened without adequately verifying the condition of the material inside. Hot/accumulated material from inside the tank suddenly fell onto the operator, resulting in material spillage and exposing the worker to a serious injury risk.
π WHAT WENT WRONG?
β‘οΈ Tank condition was not properly verified before opening.
β‘οΈ Material remaining inside the equipment was not identified.
β‘οΈ The opening was treated as a routine task.
β‘οΈ Adequate PPE and job-specific precautions are critical.
β‘οΈ The potential for stored, hot, pressurized, or hazardous material was underestimated.
π§ REMEMBER: ROUTINE JOB β ROUTINE RISK
Before opening any tank, vessel, hopper, pipeline, or equipment:
β
Stop and assess the job.
β
Check whether any material remains inside.
β
Verify temperature and pressure are safe.
β
Isolate the equipment properly.
β
Follow LOTO / isolation procedures where applicable.
β
Confirm the correct opening sequence.
β
Stand clear of the line of fire.
β
Use appropriate PPE: helmet, face shield/goggles, gloves, protective clothing and safety footwear as required.
β
Barricade the area if there is a spillage or exposure risk.
β
Follow the approved SOP / work permit and supervisor instructions.
π¦Ί PPE IS YOUR LAST LINE OF DEFENCE β BUT PROPER HAZARD IDENTIFICATION COMES FIRST.
A few seconds spent checking the equipment can prevent painful injuries, chemical exposure, burns, or even a life-changing accident.
π¨ STOP β’ CHECK β’ ISOLATE β’ PROTECT β’ THEN START
Let's build a safety culture where no job is considered "too routine" to require a proper safety check.
β οΈ BE ALERT. BE AWARE. WORK SAFE. β οΈ