JTECH

14/08/2026

RC Linear Bearing Installed Completely with PVC Cover!
In the next part, we’ll install the engine clutch and connect it to the boat propeller shaft.

JLCMC Automation Components
https://jlcmc.com/?from=JTE26

JLCMC – Register & Get $123 + Monthly MC Coupons

Surprising Savings Await! $$$
Register & enjoy $123 + Monthly MC Coupons
JLCMC | Affordable Quality You Can Trust in Industrial Automation & Manufacturing.

Products Used in This Video
Linear Bearing
Shaft Support
Linear Shafts
Spring Shaft Coupling
Universal Joint
Bearings

12/08/2026

04/08/2026

Is Homemade Sensor Ki Wajah Se Boat Kabhi Nahi Dubegi! 😱

01/08/2026

In today's video, we're building a custom PVC linear bearing mount cover for our RC boat. Its main purpose is to prevent water from leaking into the hull through the shaft hole around the universal joint.
This wasn't an easy build. We failed multiple times while trying to make the cover with the correct shape and fit, but we didn't give up. After several attempts, we finally designed a strong PVC cover with a perfect fit and an amazing locking mechanism that keeps it secure while making maintenance easy.
Watch the full process, learn from our mistakes, and see how persistence helped us create a reliable waterproof solution for our boat.

01/08/2026

In today's video, we're building a custom PVC linear bearing mount cover for our RC boat. Its main purpose is to prevent water from leaking into the hull through the shaft hole around the universal joint.

This wasn't an easy build. We failed multiple times while trying to make the cover with the correct shape and fit, but we didn't give up. After several attempts, we finally designed a strong PVC cover with a perfect fit and an amazing locking mechanism that keeps it secure while making maintenance easy.

Watch the full process, learn from our mistakes, and see how persistence helped us create a reliable waterproof solution for our boat.

29/07/2026

In this part of our RC Boat project, we're building the propeller shaft mount using a PVC sheet. We cut the PVC sheet into shape, installed a linear bearing, and fitted the propeller shaft. In the next part, we'll build a protective cover to complete and secure the entire assembly.

27/07/2026

In this video, I made a DIY window AC using a 12V 6A Peltier module. For the AC body, I used wooden board and PVC pipe sheet material. I also used a custom 3D printed water pump made with the help of RapidDirect manufacturing service.

To cool down the heat generated by the Peltier module, I used an old car heat exchanger coil with a custom water cooling setup. Initially, I planned to make a proper evaporator coil, but the attempt failed, so I modified the setup and used a CPU fan heat sink instead.

Overall, the AC worked surprisingly well for a DIY project. After running continuously for around 2 hours, the temperature dropped to around 14°C.

One thing to note is that Peltier modules are not very cooling efficient. Most of the electrical power converts into heat, and only a small amount converts into cooling, which makes them less efficient compared to real compressor-based AC systems. But for DIY experiments and learning projects, they are still very interesting to build.

Hope you enjoy the video and the complete making process.

For sponsorships and collaborations, email us at: [email protected]

Connect with Us on Social Media
Instagram: https://www.instagram.com/jtech_channel/
Twitter (X): https://x.com/Jtech_channel?t=0xQgd6FNUQ7Z0m_WppF0SQ&s=09

Disclaimer
The content on this channel is for educational and entertainment purposes only. While we strive for accuracy, the information provided may not be suitable for all viewers or situations. Always exercise caution and consult professionals when necessary. We are not liable for any damages or injuries resulting from the application of techniques shown in our videos.

24/07/2026

Today we're making a custom PVC sheet propeller for our RC boat. I also received many new parts from JLCMC that will be used in the upcoming build.

The boat is now much further along than what you're seeing in this reel, but I'm busy with the build, so I haven't had enough time to edit the full videos properly.

Stay tuned—the complete RC boat build is coming soon! 🔥⚙️🚤

24/07/2026

Building a V8 Engine Model | DIY Assembly

In this video, I'm building a highly detailed 1:6 scale V8 engine model from scratch. This electric-powered model replicates the appearance and working mechanism of a real V8 engine, featuring moving pistons, a rotating cooling fan, belt-driven accessories, an air filter, cylinder heads, exhaust headers, and a realistic alternator and water pump system. Powered by a small electric motor, it demonstrates the internal motion of a V8 engine in slow motion, making it perfect for understanding basic engine mechanics.

I'll assemble every part step by step, explain how the mechanism works, and show the completed engine running. If you're interested in cars, mechanical engineering, 3D printing, RC models, or DIY projects, this build is for you.

Features

1:6 scale V8 engine model
50+ individual parts
Realistic moving mechanical components
Electric motor-driven operation
Detailed DIY assembly
Engineering and educational demonstration

If you enjoy unique engineering projects, don't forget to Like, Share, Subscribe, and hit the Bell Icon for more DIY builds.