ChrisTech TV

ChrisTech TV Chris tech TV

26/08/2026

Indoor Unit Plate Installed 5 mm Lower at the Pipe Hole 🔧👌
Perfect slope achieved for proper drainage and smooth condensate flow. 💧❄️

Hashtags:

26/08/2026

Icing on the Discharge Pipe ❄️🔧
Checking the system to identify the root cause of the icing and low cooling performance.

Hashtags:

26/08/2026

Checking Low Cooling from the Indoor Unit ❄️🔧
Found the problem: icing on the discharge pipe. Further inspection is needed to identify the root cause.

Hashtags:

25/08/2026

Make Sure the Pipe Is Straight Before Joining the Fitting. 🔧👌
Proper alignment ensures a smooth, secure, and leak-free connection.

Hashtags:

24/08/2026

Releasing Refrigerant Gas Through the Suction Valve 🔧❄️
Releasing the refrigerant slowly and carefully during servicing.

Hashtags:

24/08/2026

Slowly Releasing the Refrigerant Gas 🔧❄️
Releasing the refrigerant slowly and carefully during servicing.

Hashtags:

22/08/2026

Vacuum Check – Good at -30 🔧❄️
Vacuum level reached -30 inHg, indicating a good vacuum before the next step.

Hashtags:

21/08/2026

Pump Down Complete 🔧❄️
Liquid line closed, followed by the suction line. Gauge reached 0 PSI — pump down completed successfully. ✅

Hashtags:

21/08/2026

Checking Running Pressure – R32 🔧❄️
122 PSI recorded during operation. Monitoring the pressure to verify proper system performance.

Address

Manila
1700

Website

Alerts

Be the first to know and let us send you an email when ChrisTech TV posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category