Fiberproducts.pk

28/03/2019

06/02/2019

2 Cores 3 Steel Wire Outdoor G657A FTTH Fiber Optic Drop Wire Cable 2km Roll
The optical fiber unit is positioned in the centre. Two steel wires or FRP are placed at the two sides. A steel wire as the additional strength member is also applied.Then the cable is completed with a black or color LSZH or PVC sheath.
Applications:
Used in indoor cabling,especially used for FTTH.
Used as access building cable.
Features:
1.Compact structure of protable, convenient for indoor wiring.
2.Excellent resistance to lateral pressure protection design.
3.Soft, flexible, easy to splice, and high practicability.
4.Environmental protection. Low smoke, zero alogen and flame retardant sheath.

06/02/2019

Fwdm Module For Catv + Internet 1 In 2 Out 1310 1490 1550 1310 1490 1550 wdm extensively used in optical amplifiers, WDM networks. The device combines or separates light at different wavelengths (1310nm/1490nm/1550nm) in a wide wavelength range. It can expand the capacity of a single fiber to achieve bidirectional communication, so that widely used in optical network upgrade and expansion, or introduce new comprehensive business etc.
It works on 1310nm/1490nm, so CATV signal here is delivered over same fiber using 1550nm, and FWDM is a place where all this get together.

06/02/2019

Epon Sfp Px20+++ +7.5 Dbm Output Power +7.5 output power px20+++ sfp

06/02/2019

1.25g Sfp Module 1310/1550nm 20km Optic Transceiver
1.Multi-sourced SFP package with single SC/PC receptacle;
2.Single mode single fiber bi-directional transmission;
3.Up to 10~120Km with 9/125μm SMF;
4.AC coupled for Rx and Tx side;
5.Two temperature ranges: 0°C to +70°C for commercial level,-40°C to +85°C for industrial level;
6.Operates at data rate 1.25Gbps ;
7.Complies with MIL-STD-883/GR-468;

02/02/2019

1.25g Sfp Module 1310/1550nm 20km Optic Transceiver 1.Multi-sourced SFP package with single SC/PC receptacle;
2.Single mode single fiber bi-directional transmission;
3.Up to 10~120Km with 9/125μm SMF;
4.AC coupled for Rx and Tx side;
5.Two temperature ranges: 0°C to +70°C for commercial level,-40°C to +85°C for industrial level;
6.Operates at data rate 1.25Gbps ;
7.Complies with MIL-STD-883/GR-468;

01/02/2019

10/100/1000 Media Converter With 2 Rj45 Ports Features

l In accordance with IEEE802.3 10Base-T, IEEE802.3u100Base-T,
IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FX
l Supported Ports: SC for optical fiber; RJ45 for twisted pair
l Auto-adaptation rate and full/half-duplex mode supported at twisted pair port
l Auto MDI/MDIX supported without need of cable selection
l Up to 6 LEDs for status indication of optical power port and UTP port
l External and built-in DC power supplies provided
l Up to 1024 MAC addresses supported
l 512 kb data storage integrated, and 802.1X original MAC address authentication supported
l Conflicting frames detection in half-duplex and flow control in full duplex supported
Operating Voltage
AC 220V/ DC +5V
Operating Humidity
Operating Temperature: 0℃ to +50℃
Storage Temperature: -20℃ to +70℃
Humidity: 5% to 90

01/02/2019

10/100 Media Converter With 2Rj 45 Ports
1. Auto negotiation function allows UTP ports to auto select 10/100M and Full Duplex or Half Duplex.
2. The UTP port supports the connection of MDI/MDI-X auto crossover.
3. Singlemode Fiber: the max distance up to 60km
4. Supporting the max 1536 byte Ethernet packet
5. Supporting flow control
6. Adopting internal power supply
1. Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX
2. Ambient temperature: 0 ~ +50°C Storage temperature: -20 ~ +70°C Humidity: 5% ~ 90%
3. Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: SC,1000Mbps
4. Cable : UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber : singlemode : 8.3/125, 8.7/125, 9/125μm (distance 20-100km)
5. Flow control: Full Duplex: IEEE802.3x Half Duplex: back pressure
6. Power: DC 48V to DC 5V
7. MAC address table: 4K
8. Data Buffer: 256K

30/01/2019

Gepon Vsol 16port Olt With Px20++ Sfp V1600D16
Chassis Rack 1U 19 inch standard box
1000M Uplink Port
QTY 12
Copper 4*10/100/1000M auto-negotiation
SFP (independent)
8*SFP Or 4*SFP and 4*SFP+ slots (SFP+ is 10GE port
EPON Port QTY 16
Physical Interface
SFP Slots
Connector Type
1000BASE-PX20+
Max splitting ratio 1:64
Management Ports 1*10/100BASE-T out-band port, 1*CONSOLE port
PON Port Specification
Transmission Distance 20KM
EPON port speed Symmetrical 1.25Gbps
Wavelength TX 1490nm, RX 1310nm
Connector SC/PC
Fiber Type 9/125μm SMF
TX Power +2~+7dBm
Rx Sensitivity -27dBm
Saturation Optical Power -6dBm
Management Mode SNMP, Telnet and CLI
Management Function
Fan Group Detecting;
Port Status monitoring and configuration management;
Layer2 switch configuration such as VLAN, Trunk,RSTP,IGMP,QOS, etc;
EPON management function: DBA,ONU authorization, ACL,QOS,etc;
Online ONU configuration and management;
User management;
Alarm management.
Layer2 Switch
Support port VLAN and protocol VLAN;
Support 4096 VLANs;
Support VLAN tag/Un-tag ,VLAN transparent transmission, QinQ;
Support IEEE802.3d trunk;
Support RSTP;
QOS based on port,VID,TOS and MAC address;
IGMP Snooping;
IEEE802.x flow control;
Port stability statistic and monitoring.
Layer 3Route
1024 Host Routes;
512 Subnet Routes;
256 IP Multicast Groups;
EPON Function
Support port-based rate limitation and bandwidth control;
In compliant with IEEE802.3ah standard;
Up to 20KM transmission Distance;
Support data encryption, multi-cast, port VLAN, separation,RSTP,etc;
Support Dynamic Bandwidth Allocation (DBA);
Support ONU auto-discovery/link detection/remote upgrade of software;
Support VLAN division and user separation to avoid broadcast storm;
Support various LLID configuration and single LLID configuration; Different user and different service could provide different QoS by means of different LLID channels;
Support power-off alarm function,easy for link problem detection;
Support broadcasting storm resistance function;
Support port isolation between different ports;
Support ACL and SNMP to configure data packet filter flexibly;
Specialized design for system breakdown prevention to maintain stable system;
Support dynamic distance calculation on EMS online;
Support RSTP,IGMP Proxy.
Dimension(L*W*H)
442mm*320mm*43.6mm
Power Supply 220VAC AC:90~264V, 47/63Hz
Power Consumption 102W
Operating Environment Working Temperature -10~+55℃
Storage Temperature -40~+85℃
Relative Humidity 5~90%(non-conditioning)

30/01/2019

Gepon 8port Olt With Px20++ Pon Sfp With 16uplink Ports V1600D8
Chassis Rack 1U 19 inch standard box
1000M
Uplink Port QTY 16
Copper 8*10/100/1000M auto-negotiation
SFP (independent)
8*SFP Or 4*SFP and SFP+ slots (SFP+ is 10GE port）
EPON Port QTY 8
Physical Interface
SFP Slots
Connector Type 1000BASE-PX20++
Max splitting ratio 1:64
Management Ports 1*10/100BASE-T out-band port, 1*CONSOLE port
PON Port Specification
Transmission Distance 20KM
EPON port speed Symmetrical 1.25Gbps
Wavelength TX 1490nm, RX 1310nm
Connector SC/PC
Fiber Type 9/125μm SMF
TX Power +2~+7dBm
Rx Sensitivity -27dBm
Saturation Optical Power -6dBm
Management Mode SNMP, Telnet and CLI
Management Function
Fan Group Detecting;
Port Status monitoring and configuration management;
Layer2 switch configuration such as VLAN, Trunk,RSTP,IGMP,QOS, etc;
EPON management function: DBA,ONU authorization, ACL,QOS,etc;
Online ONU configuration and management;
User management;
Alarm management.
Layer2 Switch
Support port VLAN and protocol VLAN;
Support 4096 VLANs;
Support VLAN tag/Un-tag ,VLAN transparent transmission, QinQ;
Support IEEE802.3d trunk;
Support RSTP;
QOS based on port,VID,TOS and MAC address;
IGMP Snooping;
IEEE802.x flow control;
Port stability statistic and monitoring.
Layer 3Route
1024 Host Routes;
512 Subnet Routes;
256 IP Multicast Groups;
EPON Function
Support port-based rate limitation and bandwidth control;
In compliant with IEEE802.3ah standard;
Up to 20KM transmission Distance;
Support data encryption, multi-cast, port VLAN, separation,RSTP,etc;
Support Dynamic Bandwidth Allocation (DBA);
Support ONU auto-discovery/link detection/remote upgrade of software;
Support VLAN division and user separation to avoid broadcast storm;
Support various LLID configuration and single LLID configuration; Different user and different service could provide different QoS by means of different LLID channels;
Support power-off alarm function,easy for link problem detection;
Support broadcasting storm resistance function;
Support port isolation between different ports;
Support ACL and SNMP to configure data packet filter flexibly;
Specialized design for system breakdown prevention to maintain stable system;
Support dynamic distance calculation on EMS online;
Support RSTP,IGMP Proxy.
Dimension(L*W*H)
442mm*320mm*43.6mm
Power Supply
220VAC AC:90~264V, 47/63Hz
Power Consumptionb 45W
Operating Environment
Working Temperature -10~+55℃
Storage Temperature -40~+85℃
Relative Humidity 5~90%(non-conditioning)

30/01/2019

4 Port Vsol Gepon Olt With Px20++ Pon Sfp
V1600D4
Chassis
Rack
1U 19 inch standard box
1000M Uplink Port QTY 8
Copper 4*10/100/1000M auto-negotiation
SFP(independent)
4*SFP slots
EPON Port QTY 4
Physical Interface
SFP Slots
Connector Type 1000BASE-PX20++
Max splitting ratio 1:64
Management Ports 1*10/100BASE-T out-band port, 1*CONSOLE port
PON Port Specification
Transmission Distance 20KM
EPON port speed Symmetrical 1.25Gbps
Wavelength TX 1490nm, RX 1310nm
Connector SC/PC
Fiber Type 9/125μm SMF
TX Power +2~+7dBm
Rx Sensitivity -27dBm
Saturation Optical Power -6dBm
Management Mode SNMP, Telnet and CLI
Management Function Fan Group Detecting;
Port Status monitoring and configuration management;
Layer2 switch configuration such as VLAN, Trunk,RSTP,IGMP,QOS, etc;
EPON management function: DBA,ONU authorization, ACL,QOS,etc;
Online ONU configuration and management;
User management;
Alarm management.
Layer2 Switch
Support port VLAN and protocol VLAN;
Support 4096 VLANs;
Support VLAN tag/Un-tag ,VLAN transparent transmission, QinQ;
Support IEEE802.3d trunk;
Support RSTP;
QOS based on port,VID,TOS and MAC address;
IGMP Snooping;
IEEE802.x flow control;
Port stability statistic and monitoring.
Layer 3Route
1024 Host Routes;
512 Subnet Routes;
256 IP Multicast Groups;
EPON Function
Support port-based rate limitation and bandwidth control;
In compliant with IEEE802.3ah standard;
Up to 20KM transmission Distance;
Support data encryption, multi-cast, port VLAN, separation,RSTP,etc;
Support Dynamic Bandwidth Allocation (DBA);
Support ONU auto-discovery/link detection/remote upgrade of software;
Support VLAN division and user separation to avoid broadcast storm;
Support various LLID configuration and single LLID configuration; Different user and different service could provide different QoS by means of different LLID channels;
Support power-off alarm function,easy for link problem detection;
Support broadcasting storm resistance function;
Support port isolation between different ports;
Support ACL and SNMP to configure data packet filter flexibly;
Specialized design for system breakdown prevention to maintain stable system;
Support dynamic distance calculation on EMS online;
Support RSTP,IGMP Proxy.
Dimension(L*W*H)
442mm*200mm*43.6mm
Power Supply
220VAC
AC:90~264V, 47/63Hz
Power Consumption
30W
Operating Environment Working Temperature -10~+55℃
Storage Temperature -40~+85℃
Relative Humidity 5~90%(non-conditioning)

30/01/2019

16 Port Edfa With Wdm 19dbm+ Output Power
16 Port Edfa With Wdm 19dbm+ Output Power

30/01/2019

8 Port Edfa With Wdm 19dbm+ Dual Power Supply
8 Port Edfa With Wdm 19dbm+ Dual Power Supply

30/01/2019

19dbm 4port Edfa With Wdm With Dual Power Supply
High Quality CATV dual pump 19dBm+ 1550nm 4ports EDFA With Dual Power Supply

30/01/2019

Vfl 20km
0MW Visual fault locator
1. Use with 2.5mm universal connector
2. Operates either in CW or Pulsed mode with constant output power
3. Long battery life (up to 60 hours)
4. drop-resistand and dust-proof design of laser head
5. Laser case ground design prevents ESD damage
6. Portable and rugged
7. Easy to use
8. Meets CE standards including EMC, EMI, ROHS

30/01/2019

10km Vfl 0MW Visual fault locator
1. Use with 2.5mm universal connector
2. Operates either in CW or Pulsed mode with constant output power
3. Long battery life (up to 60 hours)
4. drop-resistand and dust-proof design of laser head
5. Laser case ground design prevents ESD damage
6. Portable and rugged
7. Easy to use
8. Meets CE standards including EMC, EMI, ROHS

30/01/2019

DVP-106 Optical Fiber Cleaver Model: DVP-106
Material: high-strength steel
Product Description:
DVP-106 Precision fiber cleaver, new design, one step, simple, convenient and easy to operate,
Each cutter bit life 3000 times more than 50,000 times the blade life, convenient location blade height adjustment.
For a variety of fiber optic applications.

30/01/2019

ALK-66B Optical Fiber Cleaver This optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
• Provides approximately 36,000 /48000times optional.
• Compact body& light weight
• High Precision Cleaves
• 250um Coated or 900um Buffer fiber
• Singlemode