Ing. Momoh Bangura

Ing. Momoh Bangura Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Ing. Momoh Bangura, Digital creator, 52B Upper Mellon Street, Tar Road, Wellington, Freetown.

Punching shear is a type of failure that occurs in structural elements, particularly in flat slabs, footings, or beam-co...
07/10/2024

Punching shear is a type of failure that occurs in structural elements, particularly in flat slabs, footings, or beam-column connections, where a concentrated load causes a localized shear failure around a column or point of load application. It is called "punching" because the failure resembles a column or load "punching" through the slab or footing.

😌😌Me in real life battling with my laptop
06/10/2024

😌😌
Me in real life battling with my laptop

Aggregates calculations
06/10/2024

Aggregates calculations

The ideal temperature for placing asphalt, also known as hot mix asphalt (HMA), typically ranges between 250°F and 325°F...
02/09/2024

The ideal temperature for placing asphalt, also known as hot mix asphalt (HMA), typically ranges between 250°F and 325°F (121°C and 163°C). This range ensures that the asphalt mix is workable enough to be properly compacted, which is essential for durability and performance.

Soil nailing is a ground stabilization technique used to reinforce and stabilize slopes, excavations, and retaining wall...
22/08/2024

Soil nailing is a ground stabilization technique used to reinforce and stabilize slopes, excavations, and retaining walls. This method involves inserting slender, steel reinforcing bars, known as "nails," into a slope or excavation to enhance its stability. These bars are typically installed at a slight downward angle and then grouted in place. Once the nails are installed, a facing material, such as shotcrete, is often applied to the surface to provide additional support and protect the soil from erosion.

Isolated Footing
22/08/2024

Isolated Footing

Before the invention of AutoCAD
09/08/2024

Before the invention of AutoCAD

Rutting occurs in road pavement due to several factors:1. Heavy Traffic Loads 2. Inadequate Compaction3. Weak Subgrade4....
07/08/2024

Rutting occurs in road pavement due to several factors:
1. Heavy Traffic Loads
2. Inadequate Compaction
3. Weak Subgrade
4. High Temperatures
5. Poor Drainage
6. Poor Asphalt Mix

A runaway truck ramp is a traffic device that enables vehicles that are having braking problems to stop safely. It is ty...
05/08/2024

A runaway truck ramp is a traffic device that enables vehicles that are having braking problems to stop safely. It is typically a long, sand- or gravel-filled lane connected to a steep downhill grade section of a main road, and is designed to accommodate large trucks or buses.

When you think you have seen it all on construction works and then boom 💥 😅😅
29/07/2024

When you think you have seen it all on construction works and then boom 💥 😅😅

What is the maximum height of pouring concrete? 🤔
24/07/2024

What is the maximum height of pouring concrete? 🤔

A hidden beam, sometimes referred to as a concealed or embedded beam, is a structural element that is not visible in a b...
18/07/2024

A hidden beam, sometimes referred to as a concealed or embedded beam, is a structural element that is not visible in a building's interior or exterior design. Instead of being exposed, a hidden beam is embedded within the floor slab or ceiling. This design approach is often used for aesthetic reasons, creating a smooth, continuous appearance without visible beams protruding from ceilings or walls.

Address

52B Upper Mellon Street, Tar Road, Wellington
Freetown

Website

Alerts

Be the first to know and let us send you an email when Ing. Momoh Bangura posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category