The Spartan Painter

The Spartan Painter Welcome To My Page

03/19/2026

Step 1 to undercoating swivel kitchen doors. Always undercoat the front first then the swivel metal hinge. Must apply with thin coats for no thickness in metal hinges

03/19/2026

How you should paint pattern kitchen doors and what roller to use. Always use micro fibre 4 mil nap roller. It allows a thin application for a perfect finishes 👌 Always start with the pattern to make it easier to apply the paint in the grooves. Then spread your left over paint on your surroundings to dry up your roller, this will allow you to pick up the thicknesses in the pattern parts.

03/17/2026

How you can hide your Chrome plate on the side of your door when using dark colours. Tape the little k**b close as possible. Sand the plate and spot prime with zinzzer oil based. Then 2 coats of finish colour. When applying paint its always good to apply thin.

03/17/2026

How you can hide your Chrome plate on the side of your door when using dark colours. Tape the little k**b close as possible. Sand the plate and spot prime with zinzzer oil based. Then 2 coats of finish colour. When applying paint its always good to apply thin.

03/07/2026

How to match the exact colour to your gyprock walls Must blade a triangle piece on your gyprock wall to peel the skin and take it to a store to match your colour. Always peel in a corner power point, this help you to speed the process if you need a heat gun to dry your patch. Also helps when patching in a corner to not see your patch marks if not done correctly.

03/06/2026

Step 2 on undercoating swivel kitchen doors back side. Allow front face to dry for a full day before laying down. Always start from the middle then your surroundings when there is not much paint left on the roller. This will ensure no thickness on the outside edges. Always go back to the middle to pick up the thickness and level your paint evenly

03/06/2026

Step 2 on undercoating swivel kitchen doors back side. Allow front face to dry for a full day before laying down. Always start from the middle then your surroundings when there is not much paint left on the roller. This will ensure no thickness on the outside edges. Always go back to the middle to pick up the thickness and level your paint evenly

02/28/2026

How to clean a brush left over night. Let it soak for 3 to 5 hours and always just stay above of the metal. Then gently scrape off down ways from the metal because its easier to peel off. Letting it soak softens the paint because its not sealed and water will brake through when its for the day or hours it will brake down. I never use the brush first I take the thickness first

02/28/2026

How to clean a brush left over night. Let it soak for 3 to 5 hours and always just stay above of the metal. Then gently scrape off down ways from the metal because its easier to peel off. Letting it soak softens the paint because its not sealed and water will brake through when its for the day or hours it will brake down. I never use the brush first I take the thickness first

Address

212 Towne Center Drive
Compton, CA
90220

Telephone

+13108855953

Website

Alerts

Be the first to know and let us send you an email when The Spartan Painter posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Spartan Painter:

Shortcuts

Share

Category