Randy Flick

Randy Flick Thank you for following my Page !

I recently paid $8,900 for this project, and I am not fully confident in how the finished result turned out.While the su...
04/21/2026

I recently paid $8,900 for this project, and I am not fully confident in how the finished result turned out.
While the surface itself appears smooth, the color difference and the visible transition line make the area look more like a patch or repair than a clean, uniform finish. That is what gives me pause, especially considering the overall cost of the work.
At this point, I am trying to determine whether this is something that may improve and blend more naturally over time, or whether I should be contacting the contractor now to ask why it was not completed in a way that better matches the surrounding surface.

This project came in at $17,900, and the finished result reflects a strong level of attention to detail throughout. From...
04/21/2026

This project came in at $17,900, and the finished result reflects a strong level of attention to detail throughout. From the smooth surface to the crisp borders and well-executed curves, each element appears deliberate and carefully finished.
When design and workmanship are aligned, the quality of the result speaks for itself.

This $8,700 driveway pour was captured immediately after finishing, with clean joints, a smooth surface, and a strong ov...
04/21/2026

This $8,700 driveway pour was captured immediately after finishing, with clean joints, a smooth surface, and a strong overall appearance as it begins the curing process. The finished result reflects the kind of quality and workmanship expected from a well-executed concrete pour.

I completed this slab pour, but something about the material quantity does not seem right. I was initially told that 4 y...
04/21/2026

I completed this slab pour, but something about the material quantity does not seem right. I was initially told that 4 yards of concrete would be enough to cover the area, yet it only carried the pour this far. In the end, I had to place a last-minute order for an additional yard at a cost of $600 just to complete the job.
The pad measures 12'9" by 23'9", and based on the amount of area that was actually covered, I am not fully convinced that the original delivery was a full 4 yards.
I would appreciate input from anyone with experience in concrete work. Does this look consistent with what 4 yards should cover, and is there a reliable way to verify whether the correct quantity was actually delivered or to challenge it if it was not?

This custom entry project came in at $12,500, and the finished result reflects a high level of craftsmanship throughout....
04/21/2026

This custom entry project came in at $12,500, and the finished result reflects a high level of craftsmanship throughout. The curved layout is clean, the steps are well-defined, and the detailed finish brings the entire design together in a polished and visually striking way.
When concrete work is executed this well, the quality is evident in every part of the final result.

I am looking for honest feedback because I am extremely concerned about how this ceiling is turning out. We invested a s...
04/20/2026

I am looking for honest feedback because I am extremely concerned about how this ceiling is turning out. We invested a substantial amount in exposed custom wood beams, and they were meant to be a major focal point of the space. Unfortunately, the drywall work between them currently looks very inconsistent and unfinished, which is taking away from the overall appearance.
My biggest concern is that the ceiling surface appears patchy and uneven, and I am also worried that drywall compound may have gotten onto the unfinished wood. At the moment, the contrast between the beams and the surrounding ceiling work is making the entire area look far more chaotic than expected.
I am trying to understand whether this is still salvageable through proper finishing and cleanup, or if the texture and overall appearance are likely to remain noticeably uneven. At this stage, I am genuinely concerned that the final result may not reflect the quality we were expecting.

This patio cost $8,900, and it is disappointing to already see a crack in a brand-new slab. Issues like this are exactly...
04/20/2026

This patio cost $8,900, and it is disappointing to already see a crack in a brand-new slab. Issues like this are exactly why proper site preparation, placement, and curing practices matter so much in concrete work. When a new installation shows signs of distress this early, it raises valid concerns about the quality of the process and the long-term durability of the finished product.

I am extremely frustrated by this situation. I spend a significant amount of my free time working with gypsum in sculpti...
04/20/2026

I am extremely frustrated by this situation. I spend a significant amount of my free time working with gypsum in sculpting, so I am familiar with how the material behaves during curing and setting.
My contractor told me he could not complete the sanding because the room was too cold due to the weather outside. However, I had intentionally set the new mini-split system to 60 degrees because I believed that lower temperatures would help the gypsum set more firmly.
He later claimed that the joint tape had been compromised because the compound was not drying properly, and then left the job unfinished. At this point, I am seriously questioning the explanation I was given and why there appears to be such a disconnect over the basic properties of the material being used.

I am trying to better understand a common installation detail I have noticed in the United States. In many cases, concre...
04/20/2026

I am trying to better understand a common installation detail I have noticed in the United States. In many cases, concrete is poured first, and the stanchion is then set approximately three inches above the finished surface rather than being placed directly on the base itself.
I am curious why the stanchion is not simply anchored directly to the concrete. Is the raised spacing intentional for drainage, corrosion prevention, adjustment, or another structural reason?

This project came in at $18,500, with clear attention given to quality throughout the work. From the smooth patio finish...
04/20/2026

This project came in at $18,500, with clear attention given to quality throughout the work. From the smooth patio finish to the precisely constructed curved steps, the overall result reflects careful ex*****on and a strong focus on detail.
When a project is handled correctly from start to finish, the workmanship speaks for itself.

I recently paid $18,500 for a new curb and driveway, and at the moment the surface looks very smooth and freshly finishe...
04/20/2026

I recently paid $18,500 for a new curb and driveway, and at the moment the surface looks very smooth and freshly finished. However, I also know that early impressions can change quickly once the concrete begins to cure and more people start pointing out possible finish marks, waves, or uneven areas.
I am hoping to get honest input from those with concrete experience. Does this appear to be a well-executed installation, or are there signs that the finish quality may not be as strong as it initially appears?

We placed 48 yards today. It may look like easy money from the outside, but the conditions were far from easy, and the w...
04/20/2026

We placed 48 yards today. It may look like easy money from the outside, but the conditions were far from easy, and the wind definitely made the work more challenging than expected. Even so, we pushed through and got it done.

Address

Houston, TX

Website

Alerts

Be the first to know and let us send you an email when Randy Flick posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category