Carson Design & Prototyping

Carson Design & Prototyping CAD design and rapid prototypes are our main focus.

Love what you do….
09/15/2025

Love what you do….

You tell em FUcat…. You tell em….. some prints just don’t cooperate 🥲
09/10/2025

You tell em FUcat…. You tell em….. some prints just don’t cooperate 🥲

Needed to upgrade my energy chain…. I love being able to literally make anything I need for my printers.. Stay original ...
09/04/2025

Needed to upgrade my energy chain…. I love being able to literally make anything I need for my printers.. Stay original peeps!!

Energy chain is https://www.thingiverse.com/thing:5260591

Custom designed ends though.. 💪🏼

So I was getting board with the plain boring prime lines when I started a print…. So I wrote my own G-code…. ¯\_(ツ)_/¯
08/26/2025

So I was getting board with the plain boring prime lines when I started a print…. So I wrote my own G-code…. ¯\_(ツ)_/¯

08/01/2025

Building an ESP32 powered oscillating fan with fine tune adjustment! Crafted by the union of human ingenuity and artificial brilliance; Carson & Nova.

03/26/2025

Designing and building a non-contact water flow controller, powered via an ESP32 WROOM32-D. Eventually the finished product will have a web interface to monitor the system over wifi!

🔥 THE ULTIMATE 3D PRINTING COMPANION IS HERE! 🔥Battle-worn, rugged, and forged in the fires of trial and error—this isn’...
03/04/2025

🔥 THE ULTIMATE 3D PRINTING COMPANION IS HERE! 🔥

Battle-worn, rugged, and forged in the fires of trial and error—this isn’t just a settings guide. This is Ground Zero, your command center for conquering the chaos of 3D printing.

From filament settings to troubleshooting the trickiest failures, this book is built for makers, tinkerers, and rebels who refuse to accept failure as an option. With a schematic-infused, industrial-inspired cover, it’s a testament to every struggle, every late-night calibration, and every hard-won victory.

And, of course, it bears the mark of NOVA—because this is more than a guide. It’s a statement.

🚀 Ready to take control? Stay tuned. This is just the beginning.

CRAFT-LOG https://a.co/d/eRsynQR

Built a new water level controller with an ESP32 WROOM Dev board! It automatically reads the level based off input from ...
02/12/2025

Built a new water level controller with an ESP32 WROOM Dev board! It automatically reads the level based off input from conductive switches, designed to be attached to the 1” poly tube! Electrodes are just welding rods sharpened and pushed through holes in the two piece bracket. They pierce the tube and seal all in one!

With the ESP32, it allows me to monitor the tank and solenoid conditions from a basic web interface!

White parts printed in Performance petG.
Green printed in Ottertek Shocking green!

Introducing the NeoGrip-AX1 articulated finger brace prototype! Improves lateral support by over 160%. Also provides fin...
06/19/2024

Introducing the NeoGrip-AX1 articulated finger brace prototype! Improves lateral support by over 160%. Also provides finger support while carrying heavy objects that would otherwise dig into the hand! 80% movement retention!

Printed in Matter 3D performance petG4 nozzle 18 layer height

Prototype candle mold!! 🤯 more to come soon! Printed in Matter 3D performance petG
06/11/2024

Prototype candle mold!! 🤯 more to come soon!

Printed in Matter 3D performance petG

First piece of the sheath done! Some overhangs definitely made me nervous! 😅 Printed in Matter 3D Performance petG
04/06/2024

First piece of the sheath done! Some overhangs definitely made me nervous! 😅

Printed in Matter 3D Performance petG

Custom knife sheath in the works!👀🇨🇦💪🏼
04/05/2024

Custom knife sheath in the works!

👀🇨🇦💪🏼

Address

Langford, BC

Telephone

+14034727058

Website

Alerts

Be the first to know and let us send you an email when Carson Design & Prototyping posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Carson Design & Prototyping:

Shortcuts

Share

Category