Mike Technology

25/07/2025

Simple idea, got an old microwave, just make a turntable out of it https://youtu.be/riVOW1eEff0 ,

Hi, guys, and welcome back. In today's video. I will show you how you can make the simplest turntable, FOLLOW ME FOR MORE ON FACEBOOK - https://www.facebook....

17/07/2025

Hi there I finally got all the parts for my workstation, here is the video on it

22/05/2025

Hi there, this is the third part of the Axial-Flux Stack Generator I'm working on. In this third part, I will show you the assemble process and also some test and improvement on it, further I have to mention that further update on this generator may come in the future but at this state the generator is fully working despite that is not powerful as I say it doesn't have a iron core for getting more inductance but if one is added not only the power will be improving significantly but also the force required to turn it. And also keep I'm mind that the magnets used for building this are taken from a microwave oven, so they are not too powerful, that why it is a large construction consisting of 30 magnets and 60 coils .

Hi there, this is the third part of the Axial-Flux Stack Generator I'm working on. In this third part, I will show you the assemble process and also some tes...

14/05/2025

Well well , while editing part 3 of the axial Flux generator build , my GPU had let me down .

12/05/2025

Thank you

07/05/2025

Nearly there, axial Flux generator part 3 assembly time

25/04/2025

Hi There! Recently I have made a simple tool to test the magnetic field of magnets , making it simpler when it's time to install them . The TESTER is based on the FS276 hall effect sensor, also no external wire for power . Just a simple cr2032 3v cell , schematic and 3d file - https://youtu.be/AzYVB0NpXOo

14/03/2025

Second part is out , this time will be about the coils and what will be the best way to configure them, also how to make a mono phase 2 phase and 3 phase configuration of the coils

Hi there, this is the second part of this Axial-Flux Stackable Generator I'm currently working on. In this second part, I will show you a few things about ho...

18/02/2025

Hi guys and welcome back, not so long time ago I was working on my shed and accidentally I dropped my oscilloscope, I didn't realize it at the moment but when it was time to use it I noticed that the screen was busted, so I got a replacement for it

Hi guys and welcome back, not so long time ago I was working on my shed and accidentally I dropped my oscilloscope, I didn't realize it at the moment but whe...

28/01/2025

Hi there! recently i have started working on a diferent type of generator . This time is about an axial flux generator wich is build using microwave magnetrons magnets and few coils of few transformers. Part 1 is about the way magnets have to be places and also the way coil are behaving with and without a iron core .

25/12/2024

simple key holder DIY

25/12/2024

https://youtu.be/qK4f_LBJNYI?si=1ZUg-3GbD8h9eedu simple led tree modular construction 1.8M tall battery power & 5v with USB C