18/05/2026
PREMIUM® Bluetooth Earbud Neck Loop 3 Watt Amplifier Loop Set Spy Hidden Invisible Loop Student Fake Copy School Trial Nano Mini Earphone.
Step 1: Charge the battery into the earphone.
Open the plastic box and under the sponge is the battery.
Remove the earphone cap first, then charge the earpiece in the right direction. Make sure that the side of the cathode is facing the circuit board. Then reinstall the earpiece cap.
Step 2: Wear the earphone.
Clean the ear canal with a cotton swab.
2> Charge the earpiece into the ear canal horizontally to maximize signal reception. The handle is better in the low position for easy removal.
Quick Start Neck Buckle - Black or Beige Colour:
Step 1> Pairing with mobile phone.
A. Put the Bluetooth neck strap into pairing mode
1) When the Bluetooth neck strap is off, press and hold the Bluetooth switch for 6-10 seconds until the indicator lights up and flashes between blue and red.
2) If the Bluetooth is on or the LED flashes, press and hold the Bluetooth switch for 5 seconds to turn off the Bluetooth, then repeat step 1 above.
B. Put the mobile phone into pairing mode.
1) Go to the mobile phone panel, turn on the Bluetooth function and search for a new Bluetooth device.
2) Select T-Loop and then press OK or YES.
3) Enter the password 0000 and press OK.
* When paired, the indicator changes from flashing to blue. Some mobile phones need to connect manually after pairing.
Step 2> Wear the neck strap.
Hang the loop around the neck.
You can also put a neck strap in the coat pocket or put on the legs when you are on the spot to drive sensitive headphones, magnetic headphones. At the magnetic earpiece, the loop should be at your neck.
Step 3> Test and use the neck loop.
Once connected to the cell phone, you should be able to hear any sound in your earphone. The volume can be adjusted via the volume adjustment on the neck strap. The Bluetooth neck strap has a number of buttons all offering different functions.
