Radlin Guitars

09/25/2025

Another custom pickguard comin’ atcha!…

09/12/2025

Custom pickguards?… absolutely!

05/08/2025

Pleased to share this recently finished build...

This is my RMS model, with specs as follows: maple cap over makore body; flat-sawn maple neck with ebony fingerboard; 24 frets, stainless steel; 25-1/2" scale; D neck carve with 12" fingerboard radius; gloss top; satin back and sides; finish; Seymour Duncan JB in bridge and Jazz in neck positions; VT control configuration with 3-position toggle with coil split; Hipshot bridge and tuners.

While this specific guitar is sold, build order inquiries are welcome by email to [email protected].

Specs and features are customizable to buyer’s choice.

Photo credits to J. Amlin Photography

10/24/2024

Installed new pickups in this 8-stringer… but the replacement size was much different than the OEM pickups and didn’t fit the mounting rings.

Thanks to technology, I modeled and 3D printed a custom set of mounting rings to perfectly suit the need. 👍🏻

03/19/2024

New brass nut for this EVH ‘78 Eruption…

03/12/2024

🙏🏻 Thanks to Windsor Life Magazine, for the opportunity to tell a bit of my story… page 45.

Read Windsor Life Magazine Your Place Or Mine? 2024 by Windsor Life Magazine on Issuu and browse thousands of other publications on our platform. S...

03/02/2024

Finished off the neck reset and new bridge for this ‘68 Martin D12-20… all came together nicely. 👍🏻

02/28/2024

02/08/2024

Currently working on a new build of my RMS model, with specs as follows: alder body; 1/4 sawn maple neck with rosewood fingerboard; 25.5” scale; 9-1/2” fingerboard radius; SSS pickup configuration with 5-way selector switch; my hand wound single coil pickups; Hipshot bridge and tuners, all nickel; and planning Shoreline gold finish with mint pickguard.

I’ll be posting photos of build progress to this photo album, follow along…

02/08/2024

Time for a neck reset on this ‘68 Martin D12-20. This neck came off quite clean, I’m pleased.

I’ll be making a new bridge too, as the original was planed earlier in its life to defer a neck reset. The bridge is next to be removed.

05/18/2023

Presenting this recently completed build...

This RMT model, has specs as follows: makore body; quarter-sawn maple neck with indian rosewood fingerboard; 22 frets, stainless steel; 25-1/2" scale; C neck carve with 12" fingerboard radius; satin open pore finish; Seymour Duncan Lil'59 in bridge and neck positions; VVT control configuration with 3-position toggle; Gotoh bridge and Hipshot tuners.

This guitar is available as demo, and custom configurations of this body style are also available with a variety of material, specs and features, each to the buyer’s choice. Inquiries are welcome by email to [email protected].

Thanks!
Photo credits to J. Amlin Photography.

05/17/2023

Pleased to share this recently finished build...

This is my RMT model, with specs as follows: makore body; quarter-sawn maple neck with indian rosewood fingerboard; 22 frets, stainless steel; 25-1/2" scale; C neck carve with 12" fingerboard radius; gloss lacquer finish; Seymour Duncan Lil'59 in bridge and neck positions; VVT control configuration with 3-position toggle; Gotoh bridge and Hipshot tuners.

While this specific guitar is sold, build order inquiries are welcome by email to [email protected].

Specs and features are customizable to buyer’s choice.

Photo credits to J. Amlin Photography