ImagineCreate3D

ImagineCreate3D 3D Printing Services and 3d Design Services. With our own Shop. Send us a file you would like printed, or a sketch you would like made into a 3d model.

We can do multi-colour prints in PLA, PETG, TPU, ASA, ABS, PC, POM, PMMA, Nylon, Carbon Fiber Nylon, Glass Fiber, Wood Filled, Metal Filled, Conductive, Glow-in-the-Dark, Magnetic, Colour-Changing, Dichromatic etc.

2003-2008 Toyota Corolla Mudflaps / Rocker GuardsDurable, flexible material. Uses factory bolts. 3D scanned for perfect ...
05/16/2025

2003-2008 Toyota Corolla Mudflaps / Rocker Guards

Durable, flexible material. Uses factory bolts. 3D scanned for perfect fit.

Available on imaginecreate3d.ca and ebay.

914 Nearly Plug and Play Sequential Fuel and Ignition MS3 PRO Mini Kit.No permanent modifications to the car, harness re...
01/14/2025

914 Nearly Plug and Play Sequential Fuel and Ignition MS3 PRO Mini Kit.

No permanent modifications to the car, harness replaces factory injection harness, all adapters mount to factory locations using factory holes and hold downs. MS3 fits inside a factory inspired case that mounts in the factory location. Harness is fully tested before shipping. Comes with base tune pre-installed. Made in Canada.

Available at: imaginecreate3d.ca

#914

Available at: https://imaginecreate3d.caPeople often remove the interior fan ducts to make it easier to work on the engi...
01/14/2025

Available at: https://imaginecreate3d.ca

People often remove the interior fan ducts to make it easier to work on the engine. If these holes are left open, a lot of the engine fan's airflow will escape through these holes instead of cooling the cylinders. I have observed without the caps, idling head temperatures of 380F. With the caps idle head temperatures of 280-320F with a smooth idle.

Comes as a pair of 2 caps, designed with a recess to fit a standard width hose clamp.

Hose clamps not included.

Made in Canada. #914

03/04/2024

The JugHead Handle is specifically designed to make carrying a 5 gallon water jug more comfortable and balanced.
- Easy to store.
- Made of durable ASA material.
- Fits water jugs with a 2.5in bottom lip.
- Comfortable for both large and small hands.
Made in Canada.
Available now at: ImagineCreate3D.ca

03/04/2024

The JugHead Handle is specifically designed to make carrying a 5 gallon water jug more comfortable and balanced.
- Easy to store.
- Made of durable ASA material.
- Fits water jugs with a 2.5in bottom lip.
- Comfortable for both large and small hands.
Made in Canada.
Available now at: ImagineCreate3D.ca

The JugHead Handle is specifically designed to make carrying a 5 gallon water jug more comfortable and balanced. With it...
03/04/2024

The JugHead Handle is specifically designed to make carrying a 5 gallon water jug more comfortable and balanced. With its easy clip-on design and ability to fit both small and large hands, this handle is a convenient addition to any 5 gallon water bottle. It also promotes good posture by centering the jug for a comfortable carrying position.

- Easy to store.

- Made of durable ASA material.

- Fits water jugs with a 2.5in bottom lip.

- Comfortable for both large and small hands.

Made in Canada.

Available now at: ImagineCreate3D.ca

Z50 R Handle. 3D printed handle for the 1979-1987 Honda Z50 models. Made industrial ASA. Will not degrade from sun or he...
02/23/2024

Z50 R Handle. 3D printed handle for the 1979-1987 Honda Z50 models. Made industrial ASA. Will not degrade from sun or heat. Tucks in nice and tight to the bike, a rider will not get caught on it if sliding on or off. Does not cover the Honda Logo on the seat. (no more breaking the fender or bending the seat pan).

You have to remove the shocks, unbolt the grab handle and slid it over each side and then bolt it back together and re-install the shocks. Includes all necessary hardware to mount it to your bike.

Recommended maximum weight 250 pounds.

Made in Canada

Available now at: Phatmx.com

VW MK4 Custom Rocker Guard SetMade these for myself to make the old car look more presentable in the area they always se...
08/01/2023

VW MK4 Custom Rocker Guard Set
Made these for myself to make the old car look more presentable in the area they always seem to rust first. This is a modified version of the custom front mudflaps intended for lowered/track cars, with a cutout for the fender liner. Stays well above the frame rails. Uses factory mounting holes, and has built in drains for water removal.
Made out of industrial grade (ASA)
These are 3D printed, so they do have small characteristics that come with 3d printing.
Fits: Mk4 Golfs and Jettas. Including city models.
Made in Canada.
Available now at: https://imaginecreate3d.ca/collections/all

Volkswagen Mark 4 Jetta/Golf matching rear mudflaps now available. uses factory mounting holes.Made out of industrial (...
07/31/2023

Volkswagen Mark 4 Jetta/Golf matching rear mudflaps now available. uses factory mounting holes.
Made out of industrial (ASA)
These are 3D printed, so they do have small characteristics that come with 3d printing.
Made in Canada.
Available now at: https://imaginecreate3d.ca/collections/all

Volkswagen Mark 4 Jetta/Golf custom front mudflaps. Made these for myself to make the old car look more presentable in t...
06/26/2023

Volkswagen Mark 4 Jetta/Golf custom front mudflaps. Made these for myself to make the old car look more presentable in the area they always seem to rust first. Used for months without issue, uses factory mounting holes, and has built in drains for water removal.

Hard plastic (ASA) $60
Flexible material (Polyurethane) $70

-Hard plastic mounts with factory screws, and clips onto rocker panel. They're my personal preference, recommended if you're fenders still the original shape.
-Flexible mudflaps mount with factory screws and require glue/double sided tape for the rocker panel and fender for a tight fit. Recommended if you're fenders have filler or are bubbled out.

These are 3D printed, so they do have small characteristics that come with 3d printing.

Made in Canada.

Available now at: ImagineCreate3D.ca

3D printed Air Filter Funnel to remove your stock power robbing air filter screen The red scoop provides optimum airflow...
06/26/2023

3D printed Air Filter Funnel to remove your stock power robbing air filter screen The red scoop provides optimum airflow by funneling the air directly into the 3D printed intake boot. Utilizing the stock Air Filter and all OEM hardware.

The 3D printed flexible intake boot has been reinforced at the curve and has a larger inlet -Allows an increase in air velocity, maintaining good low end throttle response. The inlet pipe is a two-piece design and provides a double lip seal at the joint for a perfect seal.

Will work with the stock or Grom 24mm throttle bodies.

Made in Canada.

Now available at: PhatMX.com.

Address

Cobourg, ON

Website

Alerts

Be the first to know and let us send you an email when ImagineCreate3D posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ImagineCreate3D:

Shortcuts

Share

Category