Shawn's Boosted Garage

Shawn's Boosted Garage My name is Shawn Cogswell and I've been a Millwright / automotive enthusiast for most of my life.

I decided to start this YouTube channel to share some of the skills I've learned over the years from working on cars and progressing in my trade.

https://www.facebook.com/share/p/kMbFBJ9oCRgkp7oh/?mibextid=WC7FNe
04/30/2024

https://www.facebook.com/share/p/kMbFBJ9oCRgkp7oh/?mibextid=WC7FNe

Today is the day... the sun is shining, and we are close. All cleaned up, and ready for testing. Our order arrived last week, and, along with a large selection of Japanese bikes, we are now able to flash most Harley's, and BMW's.
Here's to summer, and fast, great running bikes.

https://youtu.be/xPWlcwiUBZ8This is part 1 of a quick video on installing new headlights in my Mustang. Part 2 will be ...
07/28/2023

https://youtu.be/xPWlcwiUBZ8

This is part 1 of a quick video on installing new headlights in my Mustang. Part 2 will be aiming the lights for the best lighting possible

A short video on changing the headlights in my New Edge Mustang. It’s pretty simple and the only thing you might need is a small screwdriver to unclip the bu...

https://youtu.be/3aSthjX9irwPart 7 of my transmission swap series. Thai time I install the TCI Outlaw X shifter.
05/01/2023

https://youtu.be/3aSthjX9irw

Part 7 of my transmission swap series. Thai time I install the TCI Outlaw X shifter.

Watch as I install the TCI Outlaw X shifter in my New Edge Mustang. It’s not overly difficult but it did come with some challenges. The install kit doesn’t h...

A quick video on how to bypass your clutch safety switch when swapping your car over to an automatic and you no longer n...
03/26/2023

A quick video on how to bypass your clutch safety switch when swapping your car over to an automatic and you no longer need that safety feature.

In this video I show how to quickly and easily bypass your clutch switch. It’s super simple and only takes a few minutes using just a fuse. ...

https://youtu.be/ys7vPT1jT1I
03/20/2023

https://youtu.be/ys7vPT1jT1I

In this video I show you how to remove a bearing from a blind hole using some grease, a hammer and a socket extension.

https://youtu.be/1jBGESuLXVg Check out this video of my day at the Gatornationals. The Nitro cars were nothing I’d ever ...
03/12/2023

https://youtu.be/1jBGESuLXVg

Check out this video of my day at the Gatornationals. The Nitro cars were nothing I’d ever experienced before. Those cars shook you and everything around you! If you haven’t experienced it then you should if it’s something you’d be interested in!






I experienced my first ever nitro top fuel and funny car passes. It was the most amazing thing I have ever felt and heard. I could only attend on Friday but ...

https://youtu.be/Wh_6GH3rqxcPart 6 or my transmission rebuild series. It’s finally back together!There are still more pa...
02/26/2023

https://youtu.be/Wh_6GH3rqxc

Part 6 or my transmission rebuild series. It’s finally back together!

There are still more parts to come in the following weeks. I still have to remove the old transmission and install this one. Install the transmission controller and shifter as well as change out the manual pedals for a automatic pedal.

In this video I am finally getting around to final assembly. This project was bigger then I thought and had many holdup’s along the way. I hope this was help...

https://youtu.be/kQlID8Yrh_8This video is all about assembling the sub assemblies….thanks for watching!
02/17/2023

https://youtu.be/kQlID8Yrh_8

This video is all about assembling the sub assemblies….thanks for watching!

In this video I go over the assembling of the direct, forward and reverse clutch assemblies. I also show how to check the clearance and what the clearance sh...

https://youtu.be/eLTLFdEzXyMThe next video in the transmission swap project. This video is all about changing bushings b...
02/12/2023

https://youtu.be/eLTLFdEzXyM

The next video in the transmission swap project. This video is all about changing bushings before beginning the assembly

In this video I go through the removal and installation of the planetary, oil pump, sun gear and tail housing bushings. ...

https://youtu.be/7lDQOT0wi-YA video I made about installing a Crown Vic Coolant tank in my turbo Mach 1. This will allow...
05/04/2022

https://youtu.be/7lDQOT0wi-Y

A video I made about installing a Crown Vic Coolant tank in my turbo Mach 1. This will allow better access to the turbo as well as the wide band sensor

In this video I go through the installation of a Crown Vic coolant tank in a New Edge Mustang .

Garage Quick Tip - Learn to sharpen a chisel
03/22/2022

Garage Quick Tip - Learn to sharpen a chisel

In this episode I show you how to sharpen a wood chisel. It’s not hard to do and just takes patience

Address

Rothesay Center, NB

Website

Alerts

Be the first to know and let us send you an email when Shawn's Boosted Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Shawn's Boosted Garage:

Shortcuts

Share

Category