04/01/2025
State of the Rack April 2025
i have direct outs from the Typhoon and the system 100 voice(and mixer) plus every clone direct in the mackie, with the reverb, delay, slicer and a send to the talkbox)
the mackie goes into 6 inputs of the XR18 (bus 1-2-3-4 and master), with the yc, cp, guitars, techno setup (not pictured here) and a few other things
the pedals, refaces and the mixers rack (again, details in the gallery) (used via the boredbrains UniFx, which is normalled to the MFC42 in unpatched times)
the rig is entirely MIDIfied so even when i play dronescape patches with the modular, i can still make music with the clones and address them directly and have direct outs in the interface for recording without affecting the self generating patch that plays, pretty sweet (for me)
midi comes in the MTPII from the keys/sequencers
every behringer clone is connected (i keep the out board and power them with their own PSU so i can use the 1/4 out to the mixer and the USB for updated/settings)
i decided to bring the 3 clones with the less possibilities of cables at the bottom so i can keep the o_c, zadar, quadscope visible and not buried under 40 patch cables
still waiting for the last 3 behringer modules to arrive in north america (swords, steps, waves) to fill the remaining holes, then i'll make custom rack fillers to block the holes
next is try a 30 amp 12v PSU and power all clones from 1 PSU, and another 30 amp 13 volts PSU to power the 6 power supplies, but i'm not sure it will work(ground loops/interference/etc, inputs and suggestions accepted)
