I-manager's Journal on Mechanical Engineering

I-manager's Journal on Mechanical Engineering The Journal on Mechanical Engineering aims to provide an international forum for academicians, resea

i-manager Publications is happy to announce the association with  DMI-St. John the Baptist University ,Malawi, Central A...
27/02/2024

i-manager Publications is happy to announce the association with DMI-St. John the Baptist University ,Malawi, Central Africa and Atheenapandian - India's No. 1 Training Academy for Biomedical En - India's No. 1 Training Academy for Biomedical E as the Publishing Partner for the International Conference on Innovative Management skills, Engineering Concepts and Advanced Computing Technologies
( ICIMECACT 2024) - a Multidisciplinary Conference to be held on 08 and 09th of April 2024.

i-manager Publications is pleased to be the Publishing Partner of   organized by College of Engineering and Technology, ...
03/05/2023

i-manager Publications is pleased to be the Publishing Partner of organized by College of Engineering and Technology, University of Technology and Applied Sciences, Nizwa, Oman in collaboration with IEEE Oman section. Nizwa UTAS IEEE-Oman

Journal on Mechanical Engineering (JME)Volume 13 Issue 1 January - March 2023Paper: 5Title: A Critical Review of Pigging...
24/03/2023

Journal on Mechanical Engineering (JME)
Volume 13 Issue 1 January - March 2023
Paper: 5
Title: A Critical Review of Pigging Operations in the Pipeline
Abstract
Pigging is commonly utilized in pipelines for different maintenance tasks such as cleaning and inspecting pipes using pigging pigs. This is done without interrupting the flow of goods via the pipeline. The operation is carried out by introducing a pig from the source to the end-point of the pipeline. During the pig's travel through the pipeline, it brushes out the trapped product and cleans the pipe walls. It is also utilized for pipeline inspection, providing us with interior data such as corrosion characteristics, and identifying dents, wrinkles, buckles, welding faults, and fractures. It ensures product flow and reduces product contamination within the pipeline. It eliminates accumulated debris, which eventually helps to defend against the defects with heavy duty bristles and pit cleaning brushes are highly effective in both swiping the liquids downstream, and out of pits.
Key word: Failure Stress, Mechanism, Removal Force, Upstream Oil & Gas, Pigs, Connecting, Inspecting, Maintenance, Cup Pig, Residue.

Journal on Mechanical Engineering (JME)Volume 13 Issue 1 January - March 2023Paper: 4Title: A Review on EOR Methods to I...
24/03/2023

Journal on Mechanical Engineering (JME)
Volume 13 Issue 1 January - March 2023
Paper: 4
Title: A Review on EOR Methods to Improve Heavy Oil Recovery
Abstract
Any well's oil production goes through three stages. Under well pressure, oil is naturally extracted in the first stage; the second stage begins when the well pressure drops. In the second stage, sea or brackish water is pumped into the well, forcing oil upward. Twenty to thirty percent of the well reserve is removed after the well's primary and secondary oil production stages. More than 70 percent of the oil is still present in the well, despite claims to the contrary. The third stage, often known as enhanced oil recovery or tertiary recovery, begins at this point. It is predicted that just one-third of the available oil is produced globally. Therefore, as demand rises and there is a supply shortfall, we should be able to produce more oil by adopting EOR processes. This paper presents a brief review of Enhanced Oil Recovery (EOR) processes. It is anticipated that EOR technologies will be essential in supplying the world's energy needs in the years to come given the drop in oil finds over the past few decade.
Key words: EOR, Improved Oil Recovery (IOR), Oil Production, Offshore, Heavy Oil, Residual Oil Saturation.

Journal on Mechanical Engineering (JME)Volume 13 Issue 1 January - March 2023Paper: 3Title: Well Stimulation for Hydraul...
24/03/2023

Journal on Mechanical Engineering (JME)
Volume 13 Issue 1 January - March 2023
Paper: 3
Title: Well Stimulation for Hydraulic Fracturing
Abstract
The stimulation method that is currently most often employed around the world is hydraulic fracturing. The selection of an appropriate hydraulic fracturing technique is very important. Carbonates have the option of either acid or supported fracture treatment. In this paper, the key arguments for propped hydraulic fracturing being preferred in carbonate reservoirs will be covered in depth.
key words: Hydraulic Fracturing, Propped Fracturing, Acid Fracturing, Carbonate Reservoirs, Stimulation.

Journal on Mechanical Engineering (JME)Volume 13 Issue 1 January - March 2023Paper: 2Title: Mathematical Modeling of The...
24/03/2023

Journal on Mechanical Engineering (JME)
Volume 13 Issue 1 January - March 2023
Paper: 2
Title: Mathematical Modeling of Thermal Enhanced Oil Recovery Method
Abstract
The demand for petroleum is increasing steadily, with the International Energy Agency (IEA) projecting that the world's petroleum expenditure will rise from 3564 Million Tonnes of Oil Equivalent (MTOE) in 2007 to as much as 5471 MTOE in 2015 and 6301 MTOE in 2030. More than two-thirds of the oil discovered around the world remains unrecovered; 40–70% of the original oil is still left in place after using conventional production techniques, namely, primary and secondary recovery techniques. This paper is based on the use of the Thermal Enhanced Oil Recovery (TEOR) method in a Sudanese oil field, the Orion field. There are two types of thermal EOR methods, namely In-Situ Combustion (ISC) and Hot Fluid Injection Process. The selection of a specific thermal EOR method is crucial for economic production. Also the challenges faced, such as depth limitation, conventional completion problems, reservoir heterogeneity, etc. are discussed. In order to get maximum recovery from the field, it is necessary to select a shallow depth so that heat loss does not occur inside the formation.
Key Words: Enhanced Oil Recovery, Cyclic Steam Stimulation, Cold Heavy Oil Production with Sand, American Petroleum Institute (API), Recovery Factor, Improved Oil Recovery, Steam Assisted Gravity Drainage, Reservoir.

Journal on Mechanical Engineering (JME)Volume 13 Issue 1 January - March 2023Paper: 1Title: Simulation of Gas Flow Behav...
24/03/2023

Journal on Mechanical Engineering (JME)
Volume 13 Issue 1 January - March 2023
Paper: 1
Title: Simulation of Gas Flow Behavior in Shale Gas Reservoir
Abstract
The importance of shale gas production in altering the global energy system is growing. There is consensus that hydraulic fracturing in horizontal wells is the most cost-effective and efficient method for accessing shale gas resources. For hydraulic fracturing to be successful in the long run as shale gas production expands, a number of key characteristics must be optimized. The research focuses on the development of reservoir simulators (Companion of St. Michael and St. George-International Monetary Exchange (CMG-IMEX)) and analyzing the parameters, which have a major impact on gas flow in the shale gas reservoir. In the process of gas flow characterization, the approach is to consider a dual porosity model for analyzing the reservoir simulation model of a shale gas reservoir. With the use of a model, we are able to analyze the flow of shale gas from tight reservoirs through the conductive fractures to the wellbore. The development of this research could lead to enhanced production from the shale gas wells.
Key Words: Shale Gas, Hydraulic Fracturing, CMG, Reservoir Simulators.

i-manager's Journal on Mechanical Engineering (JME), a double-blind reviewed Journal (Print ISSN: 2230-9055 Online ISSN:...
24/03/2023

i-manager's Journal on Mechanical Engineering (JME), a double-blind reviewed Journal (Print ISSN: 2230-9055 Online ISSN: 2249-0744)
presents high quality research articles on Mechanical Engineering and allied fields. Check out the latest volume, Volume 13 issue 1, January to March 2023, at the link below to read the latest research in mechanical engineering.
https://imanagerpublications.com/vie.../10/1293/JMEVol13Iss1

With the enormous increase in Journals over the recent past and new models of publishing such as open access, and mushro...
02/03/2023

With the enormous increase in Journals over the recent past and new models of publishing such as open access, and mushrooming of predatory Journals, researchers are at a crossroad over selecting the right Journals for publishing their research. This lecture “Selecting the Right Journal for publishing your Research” presented by Ms. Renisha Winston, Founder and Chairman of i-manager Publications, at Curtin University Dubai as part of Curtin Dubai Research Seminar Series on 27th February 2023 to the students and faculty at their campus, focuses on key factors to look in a Journal such as Relevance to research area, Journal’s reputation and Impact, Editorial quality, Years in Publication etc., and also highlighted on how to identify Predatory, Hijacked and Cloned Journals and pointers to take the right decisions in selecting the Journal. This lecture also narrowed down to Journals to avoid though indexed in Scopus or WoS, and Journals which are at a potentially high risk of removal. This lecture aimed at creating awareness among young researchers and contribute to ethical publishing.

With the enormous increase in Journals over the recent past and new models of publishing such as open access, and mushrooming of predatory Journals, research...

Join Ms. Renisha Winston, Founder and Chairman of i-manager Publications, at the Curtin Dubai Research Seminar Series on...
21/02/2023

Join Ms. Renisha Winston, Founder and Chairman of i-manager Publications, at the Curtin Dubai Research Seminar Series on February 27, 2023 at Curtin University Dubai. Her address, "Selecting the Right Journal for Publishing Your Research," will provide valuable insights to help researchers navigate the publishing process.

We are pleased to release the first Newsletter of 2023..
01/02/2023

We are pleased to release the first Newsletter of 2023..

The November Newsletter brings to you lot of insights on i-manager’s Journals. We are pleased to inform that i-manager’s...
24/11/2022

The November Newsletter brings to you lot of insights on i-manager’s Journals. We are pleased to inform that i-manager’s Journals have been included in the ACNP - Italian Catalogue of Periodicals.

Submissions now open for these New Journals from i-manager Publications
11/11/2022

Submissions now open for these New Journals from i-manager Publications

We are pleased to release the i-manager Newsletter for the month of October 2022
28/10/2022

We are pleased to release the i-manager Newsletter for the month of October 2022

26/10/2022

Such words of encouragement keep us moving forward......

This video contains excerpts from Editorial board member of i-manager's Journal on Material Science (JMS) and i-manager's Journal on Chemical Science(JCHEM), Dr. K. Mohan Reddy (Sr. Associate Professor, School of Engineering, University of Petroleum & Energy Studies (UPES), Dehradun, India) about his experience of working with the Journals and the process we follow.

Address

Nagercoil
629001

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+919600600702

Alerts

Be the first to know and let us send you an email when I-manager's Journal on Mechanical Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share

Category