Getta Grip

Getta Grip A dude who rig cameras in cool places for unique perspectives. ATL based.

04/17/2026

I’ve worked with other tube lights and their cases are so heavy and only come when you buy 4 or 8 quantities ($$$$). Plus I was tired of hauling them individually so I decided to make a case. It’s still a prototype but way more efficient, lighter, and safer to transport!

04/15/2026

I had these extra silks and nets for a 18x24 kit but not enough frames so instead buying the frames, I decided to make some instead! I can confidently say that welding is a delicate art form. Enjoy!

04/13/2026

Definitely batting a 1000 on this one! What you will need for this build:

(1) 6” Matthellini clamp
(1) 2.5” Matthews grip head
(1) 3/8” hex nut
(1) 3/8” modern studio male baby pin
(1) ball head with 3/8” female receiver

04/03/2026

Gettagrip: Hotel edition part 3! Thank you to for the lens and support! What you will need for this build:

(1) 3ft 5/8” rod
(2) 2ft 5/8” rod
(3) small rig super clamps
(3) 9. Solutions closed 5/8” gag
(1) 9. Solutions open gag 5/8” gag
(1) 9. Solutions dual 5/8” gag
(3) 3/8” male baby pin
(1) 3/8” female threaded ball head
(1) 2 inch 1/4” baby pin starter
(1) 5/8” receiver with 3/8” male thread
(1) 3/16” speed wrench

04/01/2026

GettaGrip: Hotel edition part 2! What you will need for this build:

(2) 6” matthellini clamp
(1) 3” matthellini clamp
(2) 2.5” grip heads
(2) 9. Solutions closed 5/8” gag
(1) 9. Solutions open gag 5/8” gag
(1) 9. Solutions dual 5/8”
(2) 3ft 5/8” rod
(1) 2ft 5/8” rod
(1) 18 inch 5/8” rod
(1) 1ft. 5/8” rod
(1) 2 inch 1/4” baby pin starter
(1) 3/8” female threaded ball head
(1) Modern Studio 5/8” fixed cross
(1) Gripfilm 5/8” swivel cross
(1) 3/16” speed wrench

03/20/2026

What’ll need for this build:

(3) 36” 5/8” rods
(1) 3/16” speed wrench
(1) 9. Solutions mini python clamp
(2) 9. Solutions 5/8” closed gag
(1) 9. Solutions 5/8” open gag
(1) 1/4-20 male baby pin
(1) gripfilm 5/8” swivel cross
(3) 6” end jaw matthellinis
(1) ball head with 3/8” female thread

03/18/2026

Was a bit uneasy without top safety for this but with a lightweight camera, the guidelines can be bent to accommodate. What you’ll need for this build:

(3) 36” 5/8” rods
(1) 24” 5/8” rod
(1) 18” 5/8” rod
(1) 16” 5/8” rod
(1) 5/8” receiver with 3/8” male thread
(3) 6” end jaw matthellinis
(2) 5/8” fixed crosses
(1) 2” 1/4-20 male baby pin
(1) ball head with 3/8” female thread
(3) 9. Solutions mini python clamp
(1) 9. Solutions 5/8” open gag
(3) 9. Solutions 5/8” closed gag
(1) 3/16” speed wrench

03/16/2026

Shortly into this build, I didn’t have 5/8” rods long enough, so speed rail it was! What you’ll need for this build:

(2) 6ft. Speed rail (1.5”)
(1) 3ft. speed rail (1.5”)
(2) 2ft. speed rail (1.5”)
(4) 1.5” swivel cheeseboros
(4) 1.5” short barrel crosses
(1) half pro-burger clamp
(1) 3/8” female thread ball head
(1) 3/16” speed wrench
(2) 1.5” swivel T’s
(4) 3/8” bolts with washers
(4) 3.5” speed rail starters (1.5”)
(1) 9/16” wrench

camerarigging

03/13/2026

Gear needed for this build:

(3) 36” 5/8” rods
(4) 3” end jaw matthellinis
(3) 9. Solutions mini python clamp with 5/8” receiver
(2) 9. Solutions closed 5/8” gag
(2) 5/8” fixed crosses
(2) gripfilm 5/8” swivel crosses
(2) 18” 5/8” rods
(1) 14” 5/8” rod
(1) 2” baby pin (1/4-20 male thread)
(1) k&f concept ball head with 3/8” female receiver
(1) 3/16” speed wrench

03/06/2026

This build is on a roll! What you will need:

(2) 6” end jaw matthellini clamps
(1) 3/16” speed wrench
(2) Gripfilm 5/8” swivel cross
(1) 2 inch 1/4” baby pin starter
(1) 3/8” female threaded ball head
(1) 5/8” receiver with 3/8” male thread
(2) 9. Solutions closed 5/8” gag
(2) 2ft 5/8” rod
(1) 10 inch 5/8” rod
(1) 9. Solutions 5/8” mini python clamp

03/04/2026

Thought this would be more complicated but was much simpler than thought. What you will need for this build:

(2) 6” End Jaw Matthellini clamps
(1) 3/16” speed wrench
(1) 9. Solutions 5/8” mini python clamp
(1) Gripfilm 5/8” swivel cross
(1) 3/8” female threaded ball head
(2) Modern Studio 5/8” fixed cross
(1) 9. Solutions closed 5/8” gag
(1) 2 inch 1/4” baby pin starter
(1) 3/8” male baby pin with (1) 3/8” hex nut
(1) 18 inch 5/8” rod
(1) 3ft 5/8” rod

Address

Atlanta, GA

Website

Alerts

Be the first to know and let us send you an email when Getta Grip posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Getta Grip:

Shortcuts

Share

Category