Toth Performance Poly engines and heads

Toth Performance Poly engines and heads This page is to show poly owners some of the development that we have done to the stock heads. It is

07/30/2025

I am having new stickers made for the Poly faithful these will be available soon contact me to order a set. 724-290-2497

06/06/2025

Wanted to let all my followers know that I am going to be casting poly 4 barrel manifolds once again I have been working with a local foundry near me to do it should have some updates soon let me know if you are interested in one

Due to the demise of Chrysler Power Magazine and the production ceasing on the Wind Tunnel Chrysler Power single 4 intak...
12/09/2024

Due to the demise of Chrysler Power Magazine and the production ceasing on the Wind Tunnel Chrysler Power single 4 intake manifolds and believe me I tried to keep the process going but many issues prevented that from happening. So, I decided to take my tunnel ram intake (pictured below) which comes with interchangeable tops for single and dual four tops and shorten it up enough to fit under the hood without cutting a hole in the hood. They will be going into production soon. These are aluminum sheet metal fabricated intakes

If you have a poly engine and want to increase the performance contact me I can help you achieve you power goal 300 to 5...
02/25/2024

If you have a poly engine and want to increase the performance contact me I can help you achieve you power goal 300 to 500 plus horsepower

Happy New Year
12/31/2023

Happy New Year

A big Thank You to all of my customers, and to everyone keeping the old Mopars going. Let me know if I can help anyone w...
12/17/2023

A big Thank You to all of my customers, and to everyone keeping the old Mopars going. Let me know if I can help anyone with anything. Have a great Christmas and a Happy New Year

Happy Thanksgiving eve
11/23/2023

Happy Thanksgiving eve

08/25/2023

"THIS IS HUGE NEWS." As many of you know I write articles for Chrysler Power magazine I had a long conversation with Managing Editor Deaven Butler today. In short Roland Osborne started the magazine for the readers and liked to do stories on cars we all could afford and our readers enjoyed reading about. Deaven and I discussed how to move forward with the magazine and after much arm twisting by me (I think it is still in a sling) going forward if you are a subscriber you will have the opportunity to have your car in the magazine in a full featured story we are undecided what to call the sections yet maybe readers rides but we will need your help with good quality pictures and story background. So if you are not a subscriber contact Deaven at Chryslerpower.com and get signed up. then contact me about doing a story on your ride you just have to be a subscriber to be eligible. You can also subscribe by phone if you like just call 607-261-1255 if there is no answer leave your number they will call you back and get you fixed up, also please tell all your Mopar friends about this unique opportunity in case they don't see my post.

Did some testing today with a carb on the tunnel ram seems to work well Air speed is uniform and high in the runners.
10/24/2022

Did some testing today with a carb on the tunnel ram seems to work well Air speed is uniform and high in the runners.

Doing some flow testing on the prototype tunnel ram intake numbers look good will do a little touch up on welds on insid...
10/24/2022

Doing some flow testing on the prototype tunnel ram intake numbers look good will do a little touch up on welds on inside of runners and test again. Will go into production soon

Some photos with the carburetors installed
07/25/2022

Some photos with the carburetors installed

Address

Eau Claire, PA
16030

Telephone

(724) 791-2514

Website

Alerts

Be the first to know and let us send you an email when Toth Performance Poly engines and heads posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share