Daiisy

Daiisy Sharing ideas in the houses
(1)

$47,500 spent on a deck built by a contractor claiming 28 YEARS of experience... and the support post is split from top ...
06/09/2026

$47,500 spent on a deck built by a contractor claiming 28 YEARS of experience... and the support post is split from top to bottom!

Do you 45° your joist or 22.5°?I prefer 22.5°
06/09/2026

Do you 45° your joist or 22.5°?
I prefer 22.5°

I'm building a deck around a mature live oak in North Florida and want to make sure I'm planning for the tree's future g...
06/09/2026

I'm building a deck around a mature live oak in North Florida and want to make sure I'm planning for the tree's future growth.

My biggest concern is leaving enough space around the trunk so that as the tree expands over the years, it won't start pushing against the decking or lifting boards. The goal is for this deck to last 20+ years without creating problems for either the tree or the structure.

For those who have built around large trees before, how much clearance would you leave to account for long-term growth?

$750 for drywall work, and now I'm left wondering if I hired a contractor or someone learning on the job.The installer w...
06/09/2026

$750 for drywall work, and now I'm left wondering if I hired a contractor or someone learning on the job.

The installer was polite and eager to start quickly, but the finished product has us questioning the workmanship. Missing corner bead, no corner tape, uneven seams, large gaps around plumbing, and multiple unnecessary drywall joints throughout the project.

When we raised our concerns, we were told that achieving a smoother, more professional finish would require a change order because it wasn't part of the original expectations.

Am I expecting too much, or does this look like subpar drywall work? Looking for honest opinions from contractors and homeowners alike.

Well, this is what I've got so far, and I think I'm officially past the point of no return. 😂I still need to add a littl...
06/09/2026

Well, this is what I've got so far, and I think I'm officially past the point of no return. 😂

I still need to add a little more rebar, but the plan is to pour concrete into all of the holes and move forward. It may not be exactly how everyone would do it, but I'm committed to seeing it through.

Treated gap. Hey deckers, I’m redecking my deck with marine grade 2x6. It’s not soaking wet and not dry either, kind of ...
06/08/2026

Treated gap. Hey deckers, I’m redecking my deck with marine grade 2x6. It’s not soaking wet and not dry either, kind of in the middle. I know ppl say to but it tight, but I feel like down the road after staining a couple times, it starts to swell back. Was thinking about gapping 1/8 but now I’m second guessing myself. Been a long time since I’ve used wood decking, what y’all think??

Attaching stringers to deck its been a while since I've done steps, but I remember adding a 2x4 ledger and notching the...
06/08/2026

Attaching stringers to deck its been a while since I've done steps, but I remember adding a 2x4 ledger and notching the stringers to sit on top. then bolting it to the band board. this one I laid out sits really low on the band board and I want to make sure it's supported properly so what would your suggestions be

The world’s longest timbers 8meters. What’s the longest you’ve had to work with 🤯
06/08/2026

The world’s longest timbers 8meters.

What’s the longest you’ve had to work with 🤯

Can I Have Back To Back 45s Like This In A 4in Drain Line
06/08/2026

Can I Have Back To Back 45s Like This In A 4in Drain Line

Should I use mitered or butt joint corners for my deck railing..?Repairing the railing and adding a “drink rail” on my o...
06/08/2026

Should I use mitered or butt joint corners for my deck railing..?
Repairing the railing and adding a “drink rail” on my own 28x16.
Miter or not to miter the corners???
Best practices...?

Address

New York, NY

Website

Alerts

Be the first to know and let us send you an email when Daiisy posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category