Jordan Bradley

Jordan Bradley Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Jordan Bradley, Digital creator, 641 Vallejo Street, San Francisco, CA.

Drywall, also known as plasterboard or gypsum board, is a construction material made of gypsum plaster pressed between sheets of paper, widely used for interior walls and ceilings due to durability.

Paid $4,850 for this drywall job and this corner is the part I keep staring at. There’s compound built up all along the ...
09/16/2026

Paid $4,850 for this drywall job and this corner is the part I keep staring at. There’s compound built up all along the outside edge, chunks coming off around it, and the electrical opening beside it is still completely unfinished. I KNOW this is mid-project and the guy is literally working on it in the picture, so I’m trying not to judge the final result before it exists. But every time another layer goes on, I start wondering how much sanding and feathering it’s going to take to make this corner disappear under paint. 😅 The rest of the room is slowly coming together, which almost makes this one rough area stand out even more. People who actually know drywall, does an outside corner normally look this chaotic before the finishing coats, or would you be asking about it now before more compound goes on?

I AM FUMING. I paid $9,860 to have this room professionally repaired and THIS is what I walked in on. There are giant se...
09/16/2026

I AM FUMING. I paid $9,860 to have this room professionally repaired and THIS is what I walked in on. There are giant seams in the ceiling, one section looks like it isn’t even sitting flush, compound is piled all over the joints, and there are still open sections of wall with framing and insulation showing. 😭 The contractor keeps telling me I’m looking at the “ugly stage” and that everything will be taped, feathered, sanded, and finished before paint, but almost ten grand is a LOT of money to spend while being told to ignore what your own eyes are seeing. I understand drywall work doesn’t look pretty halfway through, but that long dark gap across the ceiling has me questioning whether this is normal unfinished work or something that should be corrected before they keep covering it. My husband says I need to stop hovering and let them finish. Would this ceiling make you nervous at $9,860, or would you trust the process until the final coat?

I paid $8,640 for this drywall job and apparently everyone thinks there’s WAY too much compound on the wall, but I’m loo...
09/16/2026

I paid $8,640 for this drywall job and apparently everyone thinks there’s WAY too much compound on the wall, but I’m looking at it as free square footage. Every layer he adds makes the wall physically thicker, which technically means my house is getting bigger one scoop at a time. 😂 That giant ridge along the ceiling alone has probably added at least a few hundred dollars in property value because there is literally MORE building material attached to the house now. My husband says the contractor is going to sand most of it back off, which sounds completely insane after I already paid for it. Why would I spend $8,640 adding premium drywall compound just to have someone turn half of it into dust on the floor? I’m thinking we stop the job right before sanding, paint directly over every ridge and lump, and advertise it as “hand-sculpted architectural texture.” Smooth walls are everywhere. This one is custom. Shouldn’t MORE wall automatically mean more value?

This renovation has taught me that “just finish the drywall” apparently means scraping, patching, sanding, adding compou...
09/16/2026

This renovation has taught me that “just finish the drywall” apparently means scraping, patching, sanding, adding compound, scraping some more, and creating enough white debris to cover the entire house. 😂 We’re $4,850 into the drywall work and now this outside corner is getting rebuilt one layer at a time while the finished hardwood floor underneath is protected by a tarp that’s basically become part of the furniture. I’m starting to wonder whether fixing this existing corner was really the easier option compared with cutting back the damaged section and starting cleaner. Maybe the messy repair is completely normal and I’m underestimating how much demolition a replacement would require. For anyone who does this professionally, when a corner gets this rough, is rebuilding and feathering it usually the right move or would replacing a larger section have made more sense?

Paid $8,640 because I specifically did NOT want to learn drywall repair myself, and now I’m seriously wondering whether ...
09/16/2026

Paid $8,640 because I specifically did NOT want to learn drywall repair myself, and now I’m seriously wondering whether I should’ve saved the money and watched a few videos. The contractor says the heavy compound along the ceiling and around the edges is completely normal because he has to build everything out before feathering and sanding it smooth. Fine, but some of those sections look thick enough to need their own building permit. 😭 There are blobs down the side, visible fastener patches, and a giant uneven strip running across the top that I cannot imagine disappearing without hours of sanding. Everyone keeps telling me professional drywall can look horrible halfway through and turn out perfect at the end, but nobody saying that is the one paying $8,640. I don’t want to hover over the guy and make his job miserable, but I also don’t want to wait until final payment to discover the wall looks wavy. Would you stay quiet until primer goes on or start asking questions now?

I AM FUMING. I paid $7,960 to have this section rebuilt and professionally finished, and THIS is what I walked in on tod...
09/16/2026

I AM FUMING. I paid $7,960 to have this section rebuilt and professionally finished, and THIS is what I walked in on today. There’s compound piled thick down the entire corner, gaps still visible around the drywall, screw heads everywhere, and the top looks like someone just kept smearing mud until they got tired. 😭 The contractor keeps telling me it’s “only the rough stage” and that sanding and additional coats will make everything disappear, but nearly eight thousand dollars is a lot of money to spend while being told not to trust your own eyes. I understand drywall doesn’t look finished halfway through, but I expected professional work to look at least somewhat controlled before paint. My husband says I’m being impossible and need to let the guy finish before judging anything. I’m worried all these ridges and uneven patches are going to show forever once the lights hit the wall. Would this make you nervous at $7,960, or is this genuinely normal before sanding?

Paid $8,240 for this renovation because I wanted the wall rebuilt and finished WITHOUT turning it into a DIY nightmare, ...
09/16/2026

Paid $8,240 for this renovation because I wanted the wall rebuilt and finished WITHOUT turning it into a DIY nightmare, and now I’m standing here wondering whether I should’ve just bought $50 worth of tools and watched YouTube. The contractor says all the thick compound around the corner and seams is completely normal because he has to build everything out before feathering it smooth. Maybe that’s true, but some of these sections look thick enough to have their own ZIP code. 😭 There’s a whole mound around the middle seam, visible fasteners, rough patches near the ceiling, and enough compound on the wall that I can’t imagine sanding it flat without filling the entire house with dust. Everyone keeps telling me good drywall work can look terrible halfway through, but “halfway through” feels different when there’s $8,240 attached to it. Would you wait until it’s fully sanded and primed before judging, or would this amount of buildup have you stopping the job and asking for an explanation?

I paid $6,920 because I specifically DIDN’T want to learn drywall repair myself, and now I’m watching the contractor pil...
09/16/2026

I paid $6,920 because I specifically DIDN’T want to learn drywall repair myself, and now I’m watching the contractor pile compound around this doorway wondering whether I should’ve saved the money and bought a bucket. 😭 He says the ugly-looking patches, taped seams, and uneven areas are all part of the process and will disappear after more coats and sanding. Maybe that’s true, but right now the wall looks like it has 40 different repairs happening at once. There are little blobs covering fasteners, heavier buildup around the opening, and enough visible texture that I can’t picture this ever becoming one smooth wall. Everyone keeps telling me professionals intentionally build the compound out wider so they can feather it flat later, but when you’re the one paying $6,920, “trust the process” starts sounding VERY expensive. Would you let the contractor finish completely before saying anything, or would you be asking for an explanation now while everything is still easy to correct?

I knew drywall repair was messy, but I was NOT prepared for the wall to look like it survived three different renovation...
09/16/2026

I knew drywall repair was messy, but I was NOT prepared for the wall to look like it survived three different renovations at the same time. There are cut-out sections, rough seams, patches everywhere, torn paper, and joint compound spread over half the wall while the doorway is still completely unfinished. 😅 I understand this is obviously mid-project and sanding/finishing can change a lot, but right now I’m standing here wondering how much of this is normal ugly-before-pretty work and how much means somebody created way more work than necessary. I’m trying not to judge it before everything is finished, especially because drywall can look terrible halfway through, but some of these edges are rough enough that I’m getting nervous. For anyone who’s renovated a room before, does this look like a normal stage of drywall repair to you, or would you be asking questions before they go any further?

I AM FUMING. I paid $7,480 to have this room professionally repaired and finished, and THIS is what the wall looks like ...
09/16/2026

I AM FUMING. I paid $7,480 to have this room professionally repaired and finished, and THIS is what the wall looks like halfway through the job. There are giant blobs of compound piled around the doorway, visible seams everywhere, random screw heads still showing, and one section looks like somebody frosted the wall with a cake spatula. 😭 The contractor keeps telling me, “It has to look worse before it looks better,” but $7,480 is a LOT of money to stand there watching someone smear mud over a wall and trust the process. I understand sanding and finishing still have to happen, but I genuinely expected something a little cleaner and more controlled from a professional job. My husband says I’m judging it way too early and that all drywall work looks ugly at this stage. I’m starting to wonder if I’m about to pay thousands for a wall that still looks patched. Would this amount of rough compound make you nervous, or is this actually normal before sanding?

Address

641 Vallejo Street
San Francisco, CA
94133

Website

Alerts

Be the first to know and let us send you an email when Jordan Bradley posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category