Broadcast Tools, Inc.

11/19/2025

‼️ACS 4.4 G2‼️

The ACS 4.4 G2 provides matrix audio switching of 4 stereo inputs to 4 stereo outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The ACS 4.4 G2 may be controlled via its front panel rotary encoder control k**b and TAKE switch, contact closures, open collectors, logic and/or the multi-drop RS-232 serial port (USB or Ethernet optional). Installation is simplified with RJ45 audio jacks for input and output connections and plug-in euroblock screw terminal connectors for expansion and remote control.

For more information on the ACS4.4 G2 and our other problems solvers visit
WWW.BROADCASTTOOLS.COM

11/14/2025

The DTD-16 + G2 is a full-featured DTMF tone/sequence decoder that is user programmable to decode single tones or sequences up to six tones in length which can be assigned to any one of eight SPST normally open relays, eight open collectors and the USB/RS-232 serial ports.

For more information on the DTD-16 PLUS G2 visit
https://broadcasttools.com/product/dtd-16-g2-dtmf-decoder-w-relay-outputs-and-usb-serial/

11/11/2025

11/07/2025

📍AES DA 2×4 / 1×8 RJ – RJ45 AES Distribution Amplifier
Is a Eight output (1x8 or 2x4) AES/EBU distribution systme with RJ45 I/O.

📍Features/Benefits
• 2×4 or 1×8 operation set via front panel switch.
• Input signal monitoring with LED indicators and SPDT relay outputs.
• RJ45 inputs and outputs with standard Cat5 audio pinout.
• Fully RFI proofed.
• Surge protected internal power supply, 9 VDC universal switching power supply with domestic connector supplied. International connectors optional.
• Up to three units may be mounted on the optional RA-1 rack shelf. Desktop and wall mounting are also possible.

For more information on the AES DA 2x4/1x8 RJ visit
https://broadcasttools.com/product/aes-da-2x4-aesebu-distribution-amplifier/

11/05/2025

🔥NEW 🔥NEW🔥

The AES DA 2x4/1X8 G2 is a Eight Output (1x8 or 2x4) AES /EBU distribution system with terminal block I/O, dual power supply inputs, and signal bypass relays.

🔥Product Features
• Balanced AES/EBU distribution amplifier.
• 2×4 or 1×8 operation set via front panel switch.
• Input signal monitoring with LED indicators and SPDT alarm relay outputs.
• Removable euro-block screw terminal connectors are used for I/O connections. Necessary 3-position mating plugs are supplied.
• Signal bypass relays built-in, input one to output one, input two to output five on power loss.
• Fully RFI proofed.
• Surge protected internal power supply, 9 VDC universal switching power supply with domestic connector supplied. International connectors optional.
• Dual (2x) power input jacks allow for redundant power with an optional second power supply.
• Up to three units may be mounted on the optional RA-1 rack shelf. Desktop and wall mounting are also possible.

For more information on the AES DA 2x4/1x8 G2 visit
https://broadcasttools.com/product/aes-da-2x4-1x8-g2-term-aes-distribution-amplifier/

11/02/2025

😂😂

10/31/2025

Do all you hear that......👂🏼🎶🎵🎄🎁 It's Timeeee 😂

10/30/2025

Small but Mighty COA-9XDS/MAX 💪

Need to convert your satellite receiver’s DB-9 audio connector to the euro-block removable screw terminals? The Connect O’ Adapter 9 XDS/MAX will do the job. The COA-9 XDS/MAX is designed to plug into the male 9-pin D-Sub connector on the XDS, WW1 IDC “MAX” or StarGuide II / III satellite receiver and break out the analog and digital audio pins.

https://broadcasttools.com/product/coa-9-xds-max-connect-o-adapter-9/

10/28/2025

The COP-3 provides an effective way to convert the DB-9 connector to euroblock removable screw terminals and allows for analog audio output level adjustments via multi-turn trimmers. Compatible with Option B SFX Satellite receivers used by NPR.

10/25/2025

😰😂

10/24/2025

Let Broadcast Tools make your life easier with our COP-2 and COP-2/RJ!

💡COP-2
Need to convert your satellite receiver’s DB-9 audio connector to the euro-block removable screw terminals? The Connect O’ Pad 2 will do the job. The COP-2 is designed to plug into the male 9-pin D-Sub connector on the XDS, WW1 MAX, NON-Option B SFX, StarGuide II/III satellite receivers and break out the analog and digital audio pins. It allows for analog audio output level adjustments via multi-turn trimmers. https://broadcasttools.com/product/connect-o-pad-2/

💡COP-2/RJ
The COP-2/RJ converts a DB-9 connector to a standard pinout RJ45 audio jack and allows for analog audio output level adjustment via multi-turn trimmers. Alternatively, fixed-level AES digital audio switch is selectable. Compatible with XDS, Wegener iPump (Analog Output Only), WW1 MAX, NON-Option B IDC SFX, StarGuide II and Starguide III satellite receivers. https://broadcasttools.com/product/cop-2rj/

10/22/2025

Here’s two problem solvers from Broadcast Tools for the XDS or StarGuide II/III satellite receivers!

COA-37 XDS/RJ 45
The Connect O’ Adapter 37 XDS/RJ provides an effective way to convert a male DB-37 relay connector to four RJ45 jacks that can be connected to the GPI-16 Plus/RJ interface using Cat5 cables.

COA-37XDS_SERIAL
The Connect-O-Adapter 37 is a DB-37F to terminal block adapter which breaks out all 16 relay outputs and the RS-232 Netcue data (DB-9F) from your satellite receiver.

visit WWW.BROADCASTTOOLS.COM for more information on our prodcuts