Creator Critter

Creator Critter Camera & drone work with a focus on lifestyle, adventure, and cars. 3Dprints for fun!

Huzzah for the victor! 🛡️⚔️Beautiful horses, tough knights, and great entertainment at World Tournament of Champions Jo...
08/07/2025

Huzzah for the victor! 🛡️⚔️

Beautiful horses, tough knights, and great entertainment at World Tournament of Champions Jousting! One of these shots in particular was an instant favorite. Can’t wait to go back for the closing weekend to experience some Infinite Realms!

The creativeness of my amazing partner never ceases to amaze me. Her masquerade outfit featuring a lovely mask by she ...
08/06/2025

The creativeness of my amazing partner never ceases to amaze me. Her masquerade outfit featuring a lovely mask by she calls “Renaissance Bug Maiden” out at a beautiful day at


One of those shots I knew I needed to post right away which I captured . describes in his shows the reason why whips ma...
08/03/2025

One of those shots I knew I needed to post right away which I captured . describes in his shows the reason why whips make their signature cracking sound. But the visual aspect of the whip creating the sound wave is rarely casually caught on camera. Even more impressive is the dual fire whip trick which he has mastered… nay PERFECTED I captured in the same burst.

It’s always so much fun seeing Jacques’ shows at WA Midsummer Ren Faire!


I hope everyone had a happy 4th of July. Enjoyed taking some of these of the family and festivities last night.With the ...
07/06/2025

I hope everyone had a happy 4th of July. Enjoyed taking some of these of the family and festivities last night.

With the printer down for a little bit. I’m going to focus a little bit on the photography and uploading some stuff I’ve been needing to add to the portfolio.

I thought I should make a pinned post for my color choices for you all who want prints from me. There are a lot more exa...
03/22/2025

I thought I should make a pinned post for my color choices for you all who want prints from me. There are a lot more examples of how these filaments come out on my profile but here is a one stop shop of the rolls I currently have on hand and a few examples of how they look in final print form. Current color choices are…

Basic options:
Red (velociraptor whistles)
Orange [Matte finish]
Yellow (Bert & Ernie)
Green (sort of like a lime green)
Blue (Squidward bank)
Green/Purple [Matte finish] (see nail magnets post)

Silk/shiny options:
Silver (Vash cosplay revolver & Marshall Lee Guitar)
Rainbow
Black/Blue/Purple shift
Red/Yellow/Blue shift
Red/Gold/Purple shift
Red/Blue/Green shift
“Firefly” glowy [glowing specs inside black base]

Happy printing!

Learning through this process that not everything should be printed in PLA 😂 One drop and the thing shattered. 😬 BUT, I ...
03/21/2025

Learning through this process that not everything should be printed in PLA 😂 One drop and the thing shattered. 😬 BUT, I finally have the design finalized for my iPhone 15 Pro (and similarly sized phones) case that will work with MagSafe. And it will be pretty easy to modify for any other designs anyone wants for the case. Just have to start playing around with the printing material I should use, which is also harder to perfect. 😅🤷🏻‍♂️

Also, another Velociraptor Death Whistle printed for a family members who saw my other one and wanted me to do another one! These things are so cool.

Sometimes in the printing process you realize you were using the wrong model and you can’t find anything you like in the...
03/14/2025

Sometimes in the printing process you realize you were using the wrong model and you can’t find anything you like in the correct size from things other people have made. Also, there’s things you want to add to the model. SO you create your own using the mistaken model as a guide. The only drawback is using up filament for test prints, but that’s why I do the skull and dragon filament statues. That and the time it takes to make even the smallest adjustment. At least I never have to buy my own phone case ever again. 😂🤷🏻‍♂️ The software I currently use is just Boolean addition and subtraction of parts but hopefully eventually I’ll figure out the other software I have to make cleaner models and even more original creationz. Just about ready for another test print.

I have some stupid strong magnets in these but these are wonderful for magnetic nail polish. Gotta upsize the ring finge...
03/12/2025

I have some stupid strong magnets in these but these are wonderful for magnetic nail polish. Gotta upsize the ring finger and definitely the pinky for but the concept is there. 🤌🏼💅🏼 The arch-looking holder is “experimental to facilitate a velvet effect” which I’ll report back on if it works as intended. There’s some cool stuff out there that I can print! Let me know what you’d like.

Velociraptor resonating chamber made to be an Aztec Death Whistle for a friend’s birthday. Welcome to Jurassic Park? 😂🤌🏼...
03/11/2025

Velociraptor resonating chamber made to be an Aztec Death Whistle for a friend’s birthday. Welcome to Jurassic Park? 😂🤌🏼 Didn’t think this was actually going to work but came out better than I expected.

03/10/2025

New filamentz for your creationz! I think I finally found a favorite brand of filament with these beautiful color-shifty rolls from Conjure. The best part was that I didn’t need to calibrate each one separately. 🤌🏼 Which one is your favorite?

Red-Gold-Purple
Blue-Black-Purple
Red-Blue-Green
Red-Yellow-Blue

This is the second time I did this project for a friend of mine for his cosplay and likely for ECCC next weekend. The fi...
02/28/2025

This is the second time I did this project for a friend of mine for his cosplay and likely for ECCC next weekend. The first one was a trial while I worked on revisions to the calibration and method of printing. It came out so much better. I gave it to him for free since he already paid me for the first one and I myself wasn’t entirely happy with the way the first one turned out. I stand by making quality prints for my supporters. It still wasn’t perfect but he seemed much happier with it and I can’t wait to hear more feedback from him!

CN/disclaimer: this is a cosplay item based off of Vash’s revolver from the anime show. It does not fire real bullets and is for show only (though the hammer does articulate and the barrel is supposed to spin, one of the things that didn’t come out perfectly on it)

I am always taking orders/ideas from my supporters. Hit me up with things you’d like printed and I’ll see what I can do! Oh, and I have a ton more colors to choose from now. 🤌🏼

I thought about adding some Bert & Ernie song or something to this but decided against it. 😂We have a bunch of plants so...
02/28/2025

I thought about adding some Bert & Ernie song or something to this but decided against it. 😂
We have a bunch of plants so I’ll be making a bunch of pots here soon to house them in. These were for the mom’s air plants she got at the convention over the weekend which she named Bert and Ernie. The accidental layer shift on Bert made him look like he had forehead wrinkles 😂

Address

Everett, WA

Telephone

+19095198038

Website

Alerts

Be the first to know and let us send you an email when Creator Critter posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Creator Critter:

Shortcuts

Share

Category