Mariedeecrush Daily

12/14/2025

He said , he has over 20years experience on his job 😊 🙏.

12/14/2025

What are my to hide the unglazed edge of the tile? We are looking at this style of the tile for our future shower and I am wondering how to deal with the edge of the tile to make it less conspicuous. Any ideas would be appreciated 😊 🙏.

12/13/2025

12/13/2025

cut through joists, what are your recommendations? Day 03 of plumbing rough in, and I came back to this at the end of the day. Already texted my architect and the company, and will be talking first thing tomorrow. Just want to check what are my options to bring this up to code. Info: joists height measured at 11 inch, hole diameter is 06 .

12/12/2025

Jay-Z and his daughter Blue Ivy courtside again after three years... 😊 🙏..Blue is growing up right in front of us 😊 🙏.

12/12/2025

I hired a professional to do drywall. He was nice and ready to do the work quickly but it seems he overestimated his skill in drywall installation. In review, I should have looked for a company with more than 17five-star reviews.
I am very worried about the quality of this job. There is no corner bead on the half wall, no corner tape, large ridges, and a huge hole where the drain is. There are too many small sections instead of full pieces. It’s going to take a full skim coat on these walls to make them smooth...
The contractors response is he didn’t know that was our expectation and would need to do a change order.
I have attached the photos and looking for advice. I’m not sure if we are being overly critical or if the is a novice looking for more money. If it matters, we are paying him $1200 for this work.
😊 🙏 😊

12/12/2025

I hired a professional to remove and replace carpet on the upstairs floor and stairs with hardwood.

In one room, the had a dip in the middle, and they used self levelling floor compound to solve it. A lot of it (1st picture).

The installation in that room lasted a little under a week before planks in the middle popped up. Adjacent planks are cupping from that point toward one wall.

They blame humidity, but the rest of the install is fine. They want us to buy more materials and pay 1 days labour for them to come back and redo that room. Obviously, we're not ok with that.

Any recommendations on the cause? Could it be humidity, or too much levelling compound? They nailed into it, not glued. If it's the compound, is it possible to remove it .... 🤔 😊 🙏..?

12/12/2025

I'm just a biggest daughter of farmer family but I'm extremely proud of my parents ❤️ 😊 🙏.