Precision Rifle Hunters LLC

09/04/2025

My Grandad bought a whole lot of instruments and tooling, obviously many years ago, that I inherited and use weekly. They are still putting in work. They are still just as precise as they were the day they were built. U.S.A.!

08/09/2025

For the South Paws. 7mm PRC available soon.

08/09/2025

For the South Paws. 7mm PRC available soon!

07/02/2025

This is an in house Tikka rebarrel into 25 Creedmoor. I had high hopes for the ballistics it was going to make, and I was not disappointed. With barrel lengths being equal, it will have less wind drift than 6mm Creedmoor and 6.5mm Creedmoor beyond 400 yards.

07/02/2025

8.6 Black Out in-house build. 250 gr Barnes LRX, with a Super Sonic load. 16" barrel produced 1780 fps MV. It probably was not conceived as a 500 yard cartridge, but that's how we do it around here.

04/28/2025

7mm-08 Ackley Improved 162 gr ELD-X Harvester

02/27/2025

Do any Lefties need a short mag rifle build? Short action, .532" bolt face, 75° bolt throw. Unclaimed.

Prometheus. The action, recoil lug, 20 MOA Picatinny rail are all machined from one piece of steel. An action for life!

Let us know if we can make this action into the rifle and shooting system you have been planning!

11/11/2024

05/03/2024

The reason the ammunition we make shoots so precise, is because of very tight tolerances held on every step. A laboratory scale that graduates in .02 gr increments. There are 7000 grains in one pound. Weighing every powder charge to .02 gr tolerances ensures consistent velocities from each shot fired. Bullet seating depth is measured throughout the load process to ensure the proper bullet jump to barrel lands is maintained. A low ES (Extreme Spread) means no vertical fluctuation of bullet impacts at medium and long range.

04/04/2024

A client brought us a Pre-64 Wi******er 70 in .243 Win. He's read enough of me writing about the 7mm-08 Ackley Improved that he wanted the rifle rebarreled in it. But, he wanted to keep the original look of the old model 70. Lilja barrels was the only manufacturer I could find that matched the Pre-64 Wi******er 70 barrel contour. And it was coming in stainless steel. I told the client we could cerakote the steel to make it look blued. A custom house blend we have developed. Lilja sent more than enough barrel tenon to work with.

03/14/2024

.223 Rem in for load development and ammo, headed to the prairie dog towns. Customer supplied components with enough for 1000 rounds.

02/23/2024

A 7mm Bartlein blank taken to a barreled action in 7mm-08 Ackley Improved.