MixerRemix

MixerRemix Based in Bristol UK, we design, service and manufacture reproduction parts for DJ mixers..
(1)

Just added this excellent condition Vestax PMC-05 Pro SL VCA mixer to the store. Dual rail power supply and improved cha...
13/08/2025

Just added this excellent condition Vestax PMC-05 Pro SL VCA mixer to the store. Dual rail power supply and improved channel cards with ELNAs it’s quite the beast. Comes with its own footswitch and AC-14 PSU, it’s been thoroughly gone through and works perfectly.

What started out as an accidental order by a customer for a Vestax PMC-06 headphone mod turned into this. The customer b...
12/08/2025

What started out as an accidental order by a customer for a Vestax PMC-06 headphone mod turned into this. The customer bought the parts for a 06 VCA headphone mod but actually needed one for a Pro A. This requires a lot more effort and wiring so I took the existing mod and designed a kit to make it easier for people to install. This allows a DJ to hear the master out of the mixer with a flick of the switch through the headphone circuitry without needing a separate amp.

Had this Vestax MW-3000 mixing workstation in a while back with power issues. Turns out they were using the wrong polari...
10/08/2025

Had this Vestax MW-3000 mixing workstation in a while back with power issues. Turns out they were using the wrong polarity power supply and surprisingly nothing was damaged. I managed to find an old DC-15 to match and charged only for the PSU.

Universally hated it’s the Rane RS-1 power supply. Known for the tab to break off they’re just a hassle but we repair so...
09/08/2025

Universally hated it’s the Rane RS-1 power supply. Known for the tab to break off they’re just a hassle but we repair so many of them.

A bit of surgery for this Vestax PDX-2000 motherboard. One of the voltage rails wasn’t working, checked underneath to fi...
08/08/2025

A bit of surgery for this Vestax PDX-2000 motherboard. One of the voltage rails wasn’t working, checked underneath to find the entire pad was hanging off, possibly from previous repair work. I cut the traces back to where they were still attached and installed a copper PCB rivet. From there I was able to scrape back the soldermask and solder a bridge between the traces and the rivet. Now the PCB can be worked on in the future without any issues.

Some closeups of our super fancy Technics RCA phono boards. Gold plated with the exact same style as the original and fo...
07/08/2025

Some closeups of our super fancy Technics RCA phono boards. Gold plated with the exact same style as the original and for you touring DJs there is the optional ground mod to simplify your connections.

One of Vestax DF-50 kits for the PMC-50 / PMC-55. The panel is machined from 2mm thick aluminium, anodised and silkscree...
06/08/2025

One of Vestax DF-50 kits for the PMC-50 / PMC-55. The panel is machined from 2mm thick aluminium, anodised and silkscreen printed with the original artwork. The PCBs are gold plated and use a combination of JST connectors and ALPS pots. The k***s are machined from solid aluminium, anodised black with a knurled finish for excellent grip.

Need a replacement Vestax AC-20 PSU for your PMC-CX, 500, 580, DCR-500 or PMC-08? Then we’ve got you covered. Our PSU he...
05/08/2025

Need a replacement Vestax AC-20 PSU for your PMC-CX, 500, 580, DCR-500 or PMC-08? Then we’ve got you covered. Our PSU helps your gear run cooler than the original PSU, features an internal thermal fuse for protection, uses PLT Japanese connectors and is available in various voltages for use around the world. We build each one by hand and test them individually to ensure they are perfect.

Repair for a Vestax PMC-05 Pro SL. You can start to see the quality control dropping on these units, ELNA branded caps b...
04/08/2025

Repair for a Vestax PMC-05 Pro SL. You can start to see the quality control dropping on these units, ELNA branded caps being changed out for cheaper Chinese alternatives to cut costs. PGM1 had died on this unit, checked out the PCB to find this very charred resistor. Clearly pointing out that it had too much current going through it. Checked the nearby cap to find it had shorted this voltage rail to ground. Upgraded it to a nice Panasonic FM, replaced the resistor and cleaned the board.

Spot the fault, customer had a PMC-05 Pro III which wouldn’t output any audio on channel 1. Any idea why? ...
03/08/2025

Spot the fault, customer had a PMC-05 Pro III which wouldn’t output any audio on channel 1. Any idea why?

Rane TTM-57SL with dead faders. A familiar issue with this range. The headers were incorrectly connected and fried the s...
03/08/2025

Rane TTM-57SL with dead faders. A familiar issue with this range. The headers were incorrectly connected and fried the sensors on the fader PCBs. We fixed the connection and installed 3 replacement boards to get it back up and running. Whilst we were at it we also changed all the tact switches and also repaired some loose pots.

Address

Bristol

Website

Alerts

Be the first to know and let us send you an email when MixerRemix posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category